Reseñas de clientes para Máquina pelacables manual VEVOR, de 0,06 a 1,18 pulgadas, herramienta pelacables de cobre, modos de funcionamiento con manivela o taladro, máquina pelacables de alta resistencia con estructura Q235, fácil de usar, para el reciclaje de chatarra de cobre.

works as advertised

Greatt use machine

Very easy-to-use and saves lots of time

Great just is hard to change blade out. I mean really unnecessarily difficult. But everything else is good

Doesn’t cut smaller wire as easy but does a good job with the thicker wire?

Very good price and quality,easy to use once you figure out the angles of feed of the wire.

Great price for a well constructed sturdy wire casing stripper. Hard to get correct depth for initial cut, but once set it does a great quick job of cutting to strip casing.

It was a little hard to get the hang of at first, but is pretty simple to use once you get a rhythm going. I have only used it with a drill, which is a great feature. The hand-crank is only usable if you mount it to the edge of a table, otherwise the crank arm itself will hit whatever it's mounted to. The blade also comes loose really easily and veers off-center, which causes the wire to slip off the track. Despite those things, it's great for the price and I have been able to strip a ton of wire pretty quickly.

Pretty good but the blade in mine is slightly misaligned which does make it not work very well unless I guide the wire through. So I can just start it and go I have to guide the wire the whole time but still faster than by hand.

Worked as intended. I did notice the cutting wheel did come in contact with adjustment screw. This intern dulled the cutting wheel. I did try adjust the unit to minimize this contact. But otherwise the wire stripping went much fast with this unit.