Reseñas de clientes para Peladora de cables eléctrica VEVOR, 0,06-1,57 pulgadas, 400 W, motorizada y automática, 9,84 IPS (15 m/min), con cuchillas, rodillos en forma de V y ventilador, para reciclaje de chatarra de cobre.

This machine helps a big lot to save scrap copper and aluminum cables.

works as advertised

Great stripper!! Well worth the money, the 8amp fuse should be replaced with a circuit breaker fuse style. Stripping bigger and longer wire lengths the machine bound up when the wire twisted and blew the fuse. All good until youre out of fuses.

Does an ok job of stripping the wire casing. Just have to be very careful to not got too far and cut into a section you are trying to save. Could use a revision on wire feed rollers.

It was a little hard to get the hang of at first, but is pretty simple to use once you get a rhythm going. I have only used it with a drill, which is a great feature. The hand-crank is only usable if you mount it to the edge of a table, otherwise the crank arm itself will hit whatever it's mounted to. The blade also comes loose really easily and veers off-center, which causes the wire to slip off the track. Despite those things, it's great for the price and I have been able to strip a ton of wire pretty quickly.

Pretty good but the blade in mine is slightly misaligned which does make it not work very well unless I guide the wire through. So I can just start it and go I have to guide the wire the whole time but still faster than by hand.

Very easy-to-use and saves lots of time

Great just is hard to change blade out. I mean really unnecessarily difficult. But everything else is good

Doesn’t cut smaller wire as easy but does a good job with the thicker wire?

Very good price and quality,easy to use once you figure out the angles of feed of the wire.