Reseñas de clientes para Kit de cámara de vacío VEVOR de 5 galones y bomba de 3,5 CFM, con tapa de vidrio templado, bomba de vacío de una etapa con botella de aceite de 250 ml, para estabilizar madera, desgasificar siliconas y epoxis.

This has worked out great for large resin and wood pojects. The pot seals well and the pump draws a vacuum quickly

Great set up. The pump is super quiet and the chamber holds vacuum for as long as you need. No issues or complaints so far. Thank you.

I purchased this for a river table project. It arrived on time and the packaging was very good (box had been dented during shipping but no damage to the product). Instructions were not fantastic but I was able to find a few YouTube videos that made it simpler. I’ve used it 5 times now and no issues whatsoever. There are some tips/tricks people have left in their reviews which have helped. Otherwise I highly recommend the product for the price point and quality. One thing I would do differently would be to buy a larger capacity pot. The 5 gallon doesn’t hold a 5 gallon bucket so will likely be getting one of those in the future when necessary.

This is my first try at using a vac pot for wood stabilization and it turned out great. This vac pot holds vac very well and is well built with the glass lid and stiff sided pot. You can't go wrong with this vac pot if stabilizing wood is your intent.

Used it to boil moisture out of hydraulic oil. Ran it full out for days. Changed oil a bunch on the compressor but it did it’s job wicked good. I bought the 5 gal bucket heater and used that on the stainless pot. Works mint

Great price great tool. Vevor doing a great job again with this one The only complaint I have is with myself for not looking at all the options my fault not theirs

First time using this type equipment. Rated at 4 stars but have encountered no issues with the equipment yet. Used to stabilize wood and have stabilized four times since purchase. No issues with the operation at this time. Satisfied with purchase, shipping, and company. Would purchase again.

I used it for the first time today. PROS: * It was very easy to setup IF you don't use the included manual. Head to Youtube for instructions. *It worked. *Appears to be high quality. *Very quiet pump. CONS: *There were no instructions for adding the oil, assembling the pressure gauge, or snipping the plug on top of the gauge. *Oil container did not have enough oil to fill the pump. When I asked about it, I was told to go buy some #46 pump oil. I knew there wouldn't be enough after viewing several YouTube videos. I used it to degauss the epoxy resin before pouring it. It worked perfectly. There were no bubbles in the pour. I vacuumed three times, each time torching off the bubbles. On the third time, I added color, torched off the bubbles, and poured into the mold. I would give the manual and assembly instructions a ONE STAR, but that is not totally fair for the overall rating, because it does appear to be high quality and works well with little effort. I would recommend the chamber, just not the documentation.

Wasn't sure what the quality of the product would be being the low price but when I received it I was surprised how good it is looking forward making my molds thanks Vevor .

Very impressed with everything about this equipment; the quality, the price and the fact that it can be used for a variety of projects. I will be looking for more products from VEVOR in the future.