Reseñas de clientes para VEVOR Cambiador de neumáticos manual, herramienta portátil de montaje para destalonadores de mano para neumáticos de 8 a 16 pulgadas, compatible con remolque de camión, máquina de montaje de neumáticos para el hogar, garaje, taller de automóviles pequeño

Virker men ikke så godt. Ikke rokomenderer til alu hjul. Stål hjul ok. Efter den bestilt fuldautomatisk dækaparat.

Kjøpte denne og den fungerer veldig bra etter noen modifikasjoner, dekk klemmeren må stives av med vinkel jern eller bare bøyer den seg. Alufelger går fint så lenge man borrer et hull i plata slik at felgen sitter fest med en bolt. Men og få dekkene på er et mareritt, av er veldig lett. Så her må man modifisere litt til med og bestille en dekkpå drager fra Aliexpress.

This product is not good to use with a duck head. As you see in the picture. It make harder to changer the tyre.

crooked construction cannot be used.poor quality

I bought it to do my ATV tires. Tire machine worked great great for the front tires. But the rear tires where alot harder, and the metal bar got bent. Also the part to break the bead, the welds broke and bent that part. I tried posting pictures but it says file is to big to upload.

The bar for dismounting/breaking the bead bends easily

I purchased the manual tire changer . It worked removing the tire from the rim But I was unable to mount any tires . I tried on several tires and rims . Unless there is a different mounting tool that doesn't come with the tire changer . The original one that comes with the tire changer doesn't work .

Hard to use. Challenging task to change a tire with this tool. But better than nothing.

I mounted this unit on a large piece of plywood instead of drilling holes in the garage concrete. It is very difficult to use and to try and get tires off. The bar could have been better made to get under the tire to lift ithe lip off the rim. I struggled with the bar which fell out several times trying to get the tire off. The bead breaking part is also difficult to do. The part constantly slipped off the tire as it doesn’t quite get under the rim. I used it to get a trailer tire off, which was 12” which was very difficult.. I would not buy this again nor would I recommend it . Poorly constructed.

A rudimentry effort by the manufacturers. As a base for any duckhead mod, it will barely suffice without further work. There is little regard for any concentricities. For rough mounting and demounting in may do for some but for others there will be work involved to polish the turd. The bead breaker is very agricultural. Sharp and weak. It requires work to be useful to a person who appreciates a tool that doesn't fight back. Thus, to be used as a starting point.