Woodworking Dust Collector
1059 CFM & Cyclone System &13.2 Gal Collection Drum
Our cyclone dust collector strongly absorbs the air and dust produced by woodworking, metal processing, and so on. Through the filter bag, 99% of a 3-micron particle can be captured. 4 casters are designed for easy movement and portability. Eyes on VEVOR dust collector, keep your workspace clean and fresh.
- Friendly Note
- The products will be sent from different stocks. Please do not worry about it. You will receive ALL the parcels in recent days. If you don't get all the tracking numbers on eBay, please contact us firstly. Thanks!
- Excellent Suction Function
- Advanced Separation Technology
- Large Capacity Bags
- Flexible and Portable
High Absorption
Boasting a 2-HP motor that can reach a max airflow speed of 1059 CFM, this dust collector has a strong suction power while maintaining a noise of 73.
13.2 Gallon Collection Drum
Paddle brushes and crank handle for max airflow efficiency. The 13.2 Gal collection drum greatly meets the demand of large capacity. It benefits from its quick-release levers and independent casters for easy emptying and re-attaching.
Cyclone System
Because of the cyclone system, heavy debris is pulled down to the collection drum before the debris stream reaches the filter, achieving a better chip separation.
Direct-Mount Fine Filter
Direct-mount filter eliminates airflow restriction, increasing system efficiency. The filter boasts of pleated design, providing a large surface area for better capturing the smallest particles down to 3-micron.
Flexibility & Portability
The dust collector is equipped with a 6-inch inlet or a removable Y-fitting with two 4-inch ports. A 78.7 inch/2 m flexible hose can change different directions. Two lockable casters make it as either a stationary dust collector or a mobile unit.
Multiple Scenes
The cyclone dust collector keeps the air and the workspace clean. Widely used in coal, cement, grain, thermal power, metallurgy, sweeper, steel industry, or processing center manufacturing dust removal facilities.
- 1 x Dust Collector
- 3 x Collection Bags
- 1 x Hose
- 1 x Instruction
- Model: VV-CDC-2HP
- Material: Steel with Powder Coating
- Motor: 2 HP, 220 V, Single-phase, 2950 RPM, 9.8 A
- Air Suction Capacity: 1059 CFM/ 1800 m³/h
- Standard Bag Filtration: 3 Microns
- Collection Drum Size: 13.2 Gallon/50 L
- Impeller Material: Cast Aluminum Alloy
- Wind Pressure: 2200 Pa
- Static Pressure: 2800 Pa
- Sound Rating: 75 dB
- 1-Hose Connection Diameter: 6"/150 mm
- 2-Hoses Connection Diameter: 4"/95 mm
- Horse Length: 78.7"/2 m
- Product Dimensions: 35.4" x 19.7" x 64.6"/90 x 50 x 164 cm
- Product Weight: 110 lbs/50 kg