Reseñas de clientes para VEVOR Garage Roller Door Opener, 800 N Lift Force 164 ft Remote Control, 110V Electric Roller Gate Opener, Auto Garage Roller Gate Opener Kit with 2 Remote, Apply for Garage Store
800 N
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
237 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Mt
800 N
I ordered the first one to see if it would work, was very impressed and actually ordered a second one
0 personas encontraron esto útil
Traducir reseña a Español
Buyer
800 N
This is a great buy at $130 bucks. I had closed drum door so the stobs on opener didn’t fit my door but I knew that before ordering. I rented a hand crank material lift from Home Depot for 80 bucks just to be safe, I highly recommend this on bigger doors. Mine are 12x12. Tighten left side saddle down tight on door, remove left saddle and chain drive lift door and then I took the bracket off the wall to get it out of my way completely. Remove saddle and chain drive. I was able to use the sprocket bolt holes to mount a pice of 2x2 aluminum tubing to fit between the stobs I cut the tubing down to 1-3/4 x2”. The 2” fits right between the stobs. I also cut about an inch off the stobs to make everything fit back where I could put the brackets back in the same spot. I had this for 2 weeks procrastinating because I wasn’t sure what I was doing. I hope this helps someone else the people saying it’s doesn’t fit theirs we’re in the same boat as me with the closed drum, but it’s really easy to make it work and you will have the least expensive roll door opener around. Companies around me quoted 800-1200 to come do it and I did it for under $220. You can too. Rent the lift!
30 personas encontraron esto útil
Traducir reseña a Español
Vevor 800 N - Modified to Fit Closed Drum Roller Door
800 N
This model is designed to fit open roller door drums. For closed drum style some modification is required. You'll need to fab, or find a 'U' shaped metal bracket, cut to fit, and fasten to the closed drum plate. I used a 1 x 3/8" bolt and lock washer to fasten the bracket to an available threaded opening in the drum. Cut the two plastic legs down on the Vevor roller to fit the bracket. The bracket fits between the legs. You may need to cut a space for the cord to fit, depending on the wall mounted bracket. If your door has a smaller diameter main shaft, simply use a piece of pvc to fill the gap. The pics should give a pretty good idea of what needs to be done. (Don't try this if you're not real handy with modifying things to work...)
After modification and installation the Vevor 800 N roller door closer worked perfectly! It is very quiet and smooth. Highly recommended!
30 personas encontraron esto útil
Traducir reseña a Español
owner
800 N
This is the second one of these that I have bought. They work well. They are designed for a door that has a fixed shaft. My doors have a rotating shaft so I designed a mount that is attached to the door tube shaft and supports the opener on a bushing allowing the shaft to rotate in the center. If you are interested in buying a mount contact me on Facebook "Sam Mac"
6 personas encontraron esto útil
Traducir reseña a Español
Roll Up Door Opener
800 N
These door openers are designed for a roll up door that has a stationary shaft and the disks rotate on it. My door is a DBCI model 650 that the shaft rotates on bearings at each end. I designed a work around to make the opener work with my style door. It consists of a shaft that fits inside and is welded to the center tube of the door with a lug to engage the rotating part of the opener, a bearing that the opener clamps to and a torque arm to keep the opener from rotating. The center shaft is keyed to the lug so that you can adjust it for clearance or mount it on the left or right side of the door. I made 3 of these so I have 2 for sale if any of you need one let me know, $90.00 plus shipping. Opener works awesome
2 personas encontraron esto útil
Traducir reseña a Español
Parker
800 N
Works great on 10’x10’ rollups. Also used on 12’x10’ with no issues. I’ve installed 4 of these units the only problem is getting replacement fob remotes but universal fobs will work if extras or replacements are needed
0 personas encontraron esto útil
Traducir reseña a Español
Cajas golpeadas
800 N
En esta compra de 8 motores las cajas están muy golpeadas espero que todo internamente esté bien! Si algo sale mal les dejaré saber
0 personas encontraron esto útil
Amazing compact roller door opener
800 N
I am super glad I ended up purchasing this opener. Should have done it sooner. Easy to install and program. I was impressed with how.smooth and quiet it was. Operated a 9x8 door with ease.
I had very limited space to work with and only has a very minor modification to the door wheel for the teeth to fit. Minor as in cut a 1/2inch notch in plastic roller door wheel and was a super snug fit.
Only wish it was programable to homelink or had normal opener control versus the key fob. But hey for the price a guy can only be so picky. I tapped one to the wall by the door and the other stays in the truck.
I'm considering a second one for the other door. I just don't use it often otherwise it would be a no brainer.
2 personas encontraron esto útil
Traducir reseña a Español
Excelente
800 N
Trabaja bien! Deberían dar mejor precio al comprar más de dos unidades! Compró muy seguido! Los envíos llegan a tiempo,
0 personas encontraron esto útil
Excelente
800 N
Necesito las instrucciones en español! Y quisiera saber si dos motores los puedo controlar con un solo control remoto
0 personas encontraron esto útil