Reseñas de clientes para Adaptador de gato de transmisión VEVOR, capacidad de carga de 1100 lb / 0.5 toneladas, elevador de transmisión automotriz, acero resistente, para gato de piso con eje desmontable de 1-1/5 pulg., para garaje y taller mecánico.

Great piece of gear for the price! I am really satisfied with both the quality of the steel and the overall cost. Out of the box, the adapter is meant for floor jacks, but I just turned a custom bushing for the bottom part and now it fits and works perfectly on my transmission jack. Highly recommended!

Decent design and quality

I just love all of the veror products because they are very reasonable price made from high quality material that last and are very durable with make getting them job done with easy

Calidad sin igual, valor absoluto!

Overall good product for the price, the

Fit my floor Jack well but table too small to fit 4L60E transmission. Had to remove chains and brackets and use ratchet strap tiedowns. Worked really well though.

Way too tall once set up. And don’t plan on returning just a one one street with these A holes

I thought these things were standardized, but that is apparently not the case. The pin on this adapter is too large to fit in the saddle hole of my Larin floor jack. I will have to grind it down in order to use it.

This works in a pinch. The instructions for use show a different adapter with tilt in two directions. I was able to install the transmission using this. Hopefully there won't be another install required in my lifetime. If there is, I will purchase a dedicated transmission jack.

For the amount of money payed and considering I removed the transfer case, transmission from a 2000 F350 SRW. The only thing I've done to that jack is abuse it and use it more towards the don't do this side of the recommends. So I recommend Jack adapter it stood up to me and can be reused! It's well built the instructions are simple and to try