Reseñas de clientes para Lijadora de banda VEVOR de 1500 W y 2 HP, 5 x 208 cm, velocidad variable, para metalurgia, pulidora de banda 3 en 1 con 3 moldes de pulido y soporte de herramientas de placa plana para la fabricación de cuchillos.

This belt grinder is great for its size, I was surprised by how small it was, but it’s still perfect for small jobs. The belts track really well, there is some damage to the edge of a pulley, maybe from when it was cast and the table was not able to be squared without some filling. Over all it’s pretty cool for the price and size

Eigentlich ein tolles Gerät, dürfte aber sorgfältiger gefertigt sein. Der Gummibelag auf der Antriebsrolle ist unterschiedlich dick, weil der Alu-Grundlkörper schlampig hergestellt wurde. Um die dadurch verursachte Unwucht auszugleichen, wurden Wuchtbohrungen eingebracht. Ich verstehe das nicht, es ist doch keine Kunst, ein Drehteil so herzustellen, dass Nabe und Außendurchmesser auf hundertstel Millimeter zueinander rund laufen. Die Umlenkrollen werden nach wenigen Minuten Laufzeit so heiß, dass man sich die Finger dran verbrennt. Möglicherweise enthalten die Kugellager zu viel Fett für die hohen Drehzahlen. Verspannt sind sie nicht, das habe ich kontrolliert. Der Antrieb ist toll, hat auch bei niedrigen Drehzahlen ein gutes Drehmoment, wird unter Last nicht langsamer und wird nicht besorgniserregend warm.

El usuario no dejó ningún comentario escrito.

I bought it roughly a month ago. Found it was easy to set up and use. Have been sharpening my knifes and axes. Just loving it until the bottom roller on the flat grinding wheel assembly seized up and blew a belt. Hopefully you can get this replaced soon. Otherwise it seems great.

I bought it last month and use it for knife sharpening. It's an excellent machine but the controller has let me down. The side connector is useless and noiced some dust ingress. I have also noticed that there has been an upgrade to the controller but I have no access here in Adelaide. It's very dissapointing. The machine is awesome overall, works really well.

Der kleine Bandschleifer ist mir doch zu klein. Die verstellbare Rolle war verkratzt, also schon benutzt. Leider bleibt das Schleifband nicht in der Mitte und fällt von der Rolle, aber nur bei Nutzung der großen Gummirolle. Außerdem macht das Gerät bei kurzem Betrieb ohne Last deutliche Schleifgeräusche. Aus den Gründen gebe ich ihn zurück und kaufe ein größeres Gerät.

I have had this machine a week and so far I have been unable to use it because the thing is total garbage. The belt wont track no matter what I do to adjust anything and everything. the square tube that the other piece goes into looks like discarded remnants and the accesory just flops around in the hole. Funny, I dont see the same issue with the free machines being sent to youtubers. the tracking wheel has a ton of problems. The adjustment wheel is not sitting straight. I have done everything to try and fix that issue, and it is still sitting at a tilted cant. The needle bearings riding on cheap washers are already digging into the washers because needle bearings should not be riding on simple washers. I had to machine some stainless washer/bushings to address that. The plate that holds the adjustment wheel doesn't fully support the washers/bushings. the sleeve pin looks like it was rough ground by hand and the base of that pin needed trued up int he lathe, and its free floating, not sure why but that pin should be pressed into the plate and welded secure so the adjustment wheel rides on that pin instead of relying on clamping pressure to force the adjustment wheel straight. I tried adjusting the motor, and no luck there either, the motor is sitting all way at the end of its adjustment travel. THAT ALONE SHOULD BE A RED FLAG. I have gone over everything and the belt will not track properly and sticks off the front rollers. This means I cant grind on that, if I make the adjustment so the belt is centered on the front wheels, the belt is then overhanging on the adjustment wheel and thats still a problem because one, that's not how that should be and 2, that overhand will cause the belts on it to come undone and destroy themselves. And I have invested in 3 very expensive belts and Im not going to let those belts be ruined because vevor is scamming the public on trash machines. The base has an elongated curve in it so it doesn't sit flat on the table, and it rocks back and forth. I had to put a heavy bar mat under it to take up that bend so it would not rock back and forth. WHERE IS THE ON AND OFF SWITCH? Previous belt grinders had them. The VFD has no protection from grinding dust entering it and gosh, I wonder what issues will result from that. I had to buy an expensive 30 amp on and off switch so I could turn this machine on and off. The large wheel that came with this has deep nicks in the wheel. Since when is it ok to send stuff like this to customers? Vevor needs to be held accountable at a much higher level than just their corporate complaint dept. This nonsense is dishonest and needs to stop. I made a full review video posted on Opies Home Shop on YT for all to see and its not a good review oh vevor! https://www.youtube.com/watch?v=hh30YucXXJE

I picked up the VEVOR 30×1‑inch variable‑speed belt grinder hoping for an affordable machine with decent capability for knife making and general metalwork. While the core grinder can perform well, several design and quality‑control problems showed up quickly, and buyers should be aware of them. 1. Flat‑Grinding Jig Cannot Be Used in a True Vertical Position The product photos show the grinder running perfectly vertical when the flat‑grinding attachment is installed. In reality, the bar that the jig mounts to is too long, and it physically contacts the upper wheel assembly before the machine can rotate upright. Because of this, the belt ends up leaning forward instead of standing straight up. This isn’t a setup mistake — it’s a geometry issue. Anyone expecting a proper vertical platen for flat grinding will be disappointed unless they shorten or modify the bar. 2. Base Alignment Is Off The mounting base does not line up square with the rest of the machine. This misalignment makes the machine feel “twisted” compared to how it should sit. 3. Electrical Failure: VFD/Interface Stopped Sending Power to the Motor After only a few hours of normal use, the motor didn’t burn out — the interface/VFD stopped delivering power to it. I verified the outlet and incoming power, which are fine. The controller simply quit outputting voltage to the motor with no warning or overload indicator. This points to a failure in the wiring harness, internal connectors, or the VFD board itself. Early controller failure is a serious reliability concern for a machine advertised as a 550W variable‑speed grinder. Overall Impression The grinder has potential and performs well when it’s running, but the combination of: a flat‑grinding jig that cannot achieve the advertised vertical position, a base that doesn’t align with the frame, and a VFD/controller that stopped powering the motor after a few hours makes it hard to recommend without major caveats. The design concept is good, but the execution and quality control are inconsistent. Buyers should be prepared for possible defects, modifications, or returns. About the rating... I do think this has potential to be very good value, but if I can't turn it on, well, it is useless.

Sehr schade. Eigentlich wurde dieses Gerät von allen Seiten gelobt, mein Exemplar sieht jedoch bereits bei Lieferung Gebraucht aus und ist beschädigt. Funktionieren tut es aber etwas „mehr“ habe ich erwartet. Der Kundendienst lässt leider auch auf sich warten

Leider nicht zu gebrauchen, die Schleifbänder laufen ständig in eine Richtung weg. Dadurch ist das Gerät leider nicht zu gebrauchen, selbst nach umbaumaßnahmen