Reseñas de clientes para Tubería PEX con barrera de oxígeno VEVOR, 300 pies roja + 300 pies azul, 1/2 pulgada, para calefacción radiante por suelo radiante, tuberías de agua fría y caliente.

The PEX tubing itself worked well and appears to be good quality. Once installed, I had no issues with the pipe, and it performed as expected for my radiant floor heating project. The biggest challenge was installation. The 1000 ft coil comes without a reel or spool, which made handling and unrolling the tubing a frustrating experience. A coil this large really should be supplied on a reel to make installation more manageable. I was also very disappointed with the included hose clamps. They were far too weak and couldn't properly secure the tubing to the fittings, even temporarily during installation. I ended up discarding them and purchasing copper crimp rings (collars) and a proper PEX crimping tool to complete the job correctly. Overall, the tubing itself is good and does what it's supposed to do, but be prepared for a more difficult installation process. I would recommend buying proper copper crimp rings and a crimper from the start, and having a way to manage the large coil during installation. If VEVOR included a reel and better-quality clamps, this would easily be a much higher-rated product.

Good price worked great.

What can I say? This is a nobrainer. Going rate for pex in my neck of the woods at this time 01/17/2026 is .33 cents per foot.

Everything is great the pex piping itself is a bit hard to work with in cold weather but a heat gun or torch will fix that quick no issues at all and at a fraction of the price you can't go wrong

This was the best price I could find. It got here fast.... Right to my door. Everything has gotten so expensive so I took to the web, it was here in a matter of days.

This company is the world class. From products to service to value. This pipe is high quality better than some others i have come across.

Best price I could find on any PEX style pipe. Used it to replace the 200’ of corroded and brittle conglomeration of 3/4” galvanized and PVC main line from my meter to my house. I used Sharkbite 3/4” npt to 1” PEX fittings mostly because the 1” pex is difficult to manhandle by yourself in a trench. I will be using the remaining length to extend the run to my shop.

Got 3 1000 rolls for my hydronic floor heat system. Rolled out great! I built a flat turntable and had a helper turn it to pull the pipe straight. Worked great. Pressured up the whole system at 60 lbs and it held through the concrete pour perfectly! Great price too!!

I bought this pex tubing for in floor heat. It worked great and saved us over $1,000 vs buying from Home Depot or Menards. This pex line has the foot markings on it as well that are extremely helpful. I would recommend using this product.

Great product same quality as name brand pex products and half the price fast shipping highly recommend