Reseñas de clientes para Bomba para hidrolavadora VEVOR, eje de 1", émbolo triple horizontal, 4400 PSI, caudal de 4 GPM, kit de repuesto para hidrolavadora, compatible con los modelos Simpson MorFlex 40224, 40225 y 40226
4 GPM
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
200 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Operator
Overall good value, downside lower pressure. So make sure you check your specs very well.
0 personas encontraron esto útil
Traducir reseña a Español
M
Good replacement product
0 personas encontraron esto útil
Traducir reseña a Español
Pump
The pump looks and fit perfect. My only problem is the pressure it put out. Not hardly as strong as my original pump. The factory pump was listed as 3,500. Thie VEVOR pump is probably around 3 000.
3 personas encontraron esto útil
Traducir reseña a Español
the Dude
Bolts right up and pumps fine. I wish they'd use hex head bolts vs socket screws. There's no way to get a dead-on allen key in there so you're left with either cutting a right angle hex key down or making a ball hex make it "good enough."
The oil vent cap didn't screw properly and was a tight despite not fully threading down. This allowed water to get into the oil (milky/cloudy appearance). Thankfully, the sight glass is easy to check and I went ahead and changed the oil - I used SAE 30 Non-detergent - it takes approx 5oz of oil. You can verify in the sight glass when it's covering the dot. To change, you can either siphon the oil out or remove the drain bolt on the bottom.
I retightened it with slip pliers until the O-ring was snug.
I confirmed with a pressure gauge that the pump is preset to ~2500PSI @ open and closed triggers @ ~3100PSI from a 190CC engine.
Seems to work a bit better than the cheap vertical engine pumps but I'll update my review soon after an extensive test.
0 personas encontraron esto útil
Traducir reseña a Español
Buona
La pompa non è male visto il prezzo,io la stó utilizzando in acqua salata che non è sicuramente il suo posto,e devo dire che sembra fare il suo lavoro,la durata la si vedrà con il tempo.Per quanto riguarda la pressione non ho un manometro quindi non posso dire quanti “bar” faccia,ma non credo arrivi a quelli dichiarati.comunque la consiglio
0 personas encontraron esto útil
Traducir reseña a Español
Pompe haute pression 19,05 mm 2.5GPM
Pompe reçu dans les temps, montage délicat des raccords, débit de la buse a ajuster,
pression inferieur au 3300 PSI vendu , la qualité a l'aire bonne.
0 personas encontraron esto útil
Traducir reseña a Español
Pressure washer pump
I recently purchased this pressure washer pump for my dewalt pressure washer that failed. It worked great, bolts up without any problems. I also liked the adjustable pressure knob for turning down or up the pressure of the pump.
0 personas encontraron esto útil
Traducir reseña a Español
Solid pump
Very surprised with the quality of this unit, i buy a few larger brand pumps a year and this seems to be made as well and better than some.
1 personas encontraron esto útil
Traducir reseña a Español
Looks good
Looks well built have not had a chance to install it yet.
I think it will be fine For the the product
0 personas encontraron esto útil
Traducir reseña a Español
Freshwater
4 GPM
Good value, fast delivery, exact replacement
1 personas encontraron esto útil
Traducir reseña a Español