Reseñas de clientes para Bomba para hidrolavadora VEVOR, eje de 1", émbolo triple horizontal, 4400 PSI, caudal de 4 GPM, kit de repuesto para hidrolavadora, compatible con los modelos Simpson MorFlex 40224, 40225 y 40226

Purchased the 3700 psi received the 3300 psi pump. No exchange or reshipping me the 3700 psi pump. Sent partial refund after jumping through alot of hurdles. Wont be back.

I bought two pumps, one is defective and has no pressure. I messaged the company and they didn't respond, and there's no warranty.

This is my second pump within a year the first one only lasted a year this one on the first go I like on a roof waterblasting and three of the nuts for the porcelain valves I guess you call them were loose and I lost all pressure and I had to replace the seals on the if I hadn't noticed that then it would have been the stuff pump on the first go so quality I'm in the middle see how long this one last four but yeah price is the only reason really that I bought a second pump

This product seems like it would work well. But the issue I have was replacing a AAA TRIPLEX PUMP on a DeWalt pressure washer with a Honda gx200 engine. This pump seem like it would work, but it's not possible Imo to tighten the Allen bolts. The AAA TRIPLEX PUMP is designed different. I have attached all 3 images.

Purchased the 4gpm 4400psi pump, installed it with no problems and it works but does not produce the pressure stated. I have a new nozzle, 13hp motor, which is what is specified to operate with but my pump at full speed only produces 3000psi, which is good pressure for most pressure washers but I expected it to produce the rated pressure of 4400psi. VEVOR could not explain why it did not produce the pressure and only stated that the pressure, while spraying, will be "slightly less" than the advertised pressure. First they offered my a refund of $20 and I could keep the pump but I fussed and explained that its not what I ordered and that a pump that they sell that is rated for the pressure mine produces is $50 less than what I paid for this pump. They agreed on a refund of $50 and I keep the pump, but I still have not received the $50. Beware that your pump probably will not produce the rated pressure. Buy the pressure gauges made for the pumps if you want to actually see what it is producing, otherwise you have no way of knowing what the pressure is. Mine does fine at 3000psi its just the fact that I ordered one that should have produced 4400psi while spraying. I also got the three year warranty so, we will see if it goes that long, and how hard it is to get a claim resolved. Used mine for about 3 hrs so far with no issues. My motor is way oversized for the pump but still uses lots of fuel, but I was expecting a 4400psi pump.

leak oil from day one would not replace

This pump leaked from the unloader on the first job and then I got a new unloader and then after about 4 jobs the pressure of this pump got worse and worse so I had to discontinue use of the pump it did work decent at first just do not use for a pressure washing business

Waste of time and mony pump plunger bolt snapped in 10 min worn thread really disappointed

The way the machine is packaged leads to it being very prone to get hit during transport, and the package isn't labeled as fragile.

I ordered a 3700, My Original unit is a 3600, I believe what they sent is a 3300 - I verified I ordered the 3700 - manual says 3300, Box model says 3300 - just sent them a refund/question