Reseñas de clientes para Bomba para hidrolavadora VEVOR, eje de 1", émbolo triple horizontal, 4400 PSI, caudal de 4 GPM, kit de repuesto para hidrolavadora, compatible con los modelos Simpson MorFlex 40224, 40225 y 40226

I bought this pump and put it on a 15hp engine. I used it to wash our vehicles and it worked amazing. With the volume of water and pressure you have to make sure you are holding on to the wand it will easily tare it out of your hands. I highly recommend this product.

The unit appears to be very well made. all its components appear correct. my unfortunate issue is that my pressure cleaner requires a water pressure switch to allow it to start. this unit does not provide any ability for this to happen. if the pump is a straight pressure cleaner with no safety devices attached to it. this probably will work perfectly. if you purchase this unit for a pressure cleaner like mine and have to take it to a shop to modify it to fit your unit, the least expensive shop I found in my area is $168.00 per hour plus parts. other than that is a beautiful unit. VEVOR is a great company with Great products. I did submit all this pictures and questions to Their technical support and they stated that it would work. that is why I purchased it.

Works good no complaints

Pump works great! It's exactly as described and mounted quickly and easily. Would recommend and buy again if needed.

works well, many thanks

Great product for a fraction of the price and a retailer

Excellent product

Ordered the 3700 PSI pump to replace a leaky AAA pump on my Dewalt 3500 pressure washer. I did not use the allen bolts that came with the new pump, I instead re used the factory bolts. Installation was simple, but the area where the bolts go is crowded, and the easiest way to get the bolts started is to slide the pump on just enough to get the bolts started. You want to leave about 1/2 inch space from the base of the pump to the motor. This gives you the room for the bolts to drop in and get started several turns before finally pushing the pump all the way in. Pump obviously has more pressure than the old one, and blew a hole iin my pressure washer hose. It was the original cheap PVC 25 ft hose that came with it, and it is several years old so I just replaced it. The small allen screw on top of the red knob will increase the pressure (it has a 10mm nut as a set screw). My pump came adjusted to around 3000 psi, and I maxed her out to get the full 3700 psi

Nickel se monte sans problème sur un autre nettoyeur haute pression donc les pièces n'existe plus bravo pour la rapidité de livraison en 1 jour vous êtes au top du top 3ncore merci.

Perfect for replacing my original pump.