Reseñas de clientes para VEVOR Extractor de Aceite 10 L Extractor de Líquido con 14 Adaptadores Bomba Extractora Líquidos 10 x 5,6 x 15 cm para Sustitución de Aceite en ATV, Barcos, Equipos Agrícolas, Vehículos de Motores

Wow, I've been changing my oil the wrong way for years. I hooked up a compressor and in 4 mins all the oil was extracted. So much cleaner.

Works better than the more expensive models I've used. The capacity is very large and could do multiple oil changes before having to be drained. It even came with an industry standard 1/4" air fitting already installed.

delivered on schedule. put it work right away pulling 30wt oil out of a briggs 5hp on a 30 degree day. the suction lines are a bit stiff but worked perfectly using the hand pump, have not tried compressed air option yet. 1/2 the price of items that do the same job at the local tool store that sells all the imported stuff or even the big auto parts stores that sell item that looks very similar.

Yet to use Watched online YouTube with Scotty kilmer. On arrival l inspected all the equipment and was very pleased with the build of all the materials and parts. Spent a large amount on a very well known brand and it was And is useless. I kept trying to make it work but the seal arrangement would not create vacuum sufficient to extract any fluid. Very happy with the new one as you only look at the seal and surface 99% positive for the quality and reliability.

Very useful unit have used it a lot , makes my job a lot easier would recommend to others in the industry

Worked great! price is hard to beat! wish the tank graduations were in (freedom units :quarts / gallons / beers) but they are in units of Soda pop (liters) but I will forive them this time.

I've used this twice. Once to remove automatic transmission fluid from the transmission. And again to pump fluid into my differential to replace the differential fluid. This makes the job super easy and works well, And much quicker than doing it by hand! However I am experiencing two different quality problems. The top that screws onto the base is warped and doesn't want to thread on properly. Causes the lid not to seal properly onto the canister. And secondly the quick release on the top is very difficult to use. The quick release on the hose works perfectly well. So it seems like maybe there's some sort of quality control issue.

Great value n function Drain n fill is the best feature

Great fluid tool especially with the adapter kit. It makes transmission and differential services a breeze. Easy to use and easy to clean. My only negative is it can be a little finicky switching the main switch from dispense to extract, but other than that it's an all around good tool.

I used it to remove trans. fluid from a transmission I am working on. All the parts were there the only thing is the plastic lines need to be at least 6 ft long, I needed to connect the 1/4" and the 5/16" ones together to get it to drain using the transmission tube. And the air on off valve is junk. It would not turn off the air supply all the way. Besides that, it worked just fine .