Reseñas de clientes para Bomba de recirculación de agua caliente VEVOR con válvula de derivación, kit de bomba de recirculación instantánea con temporizador, adaptador, sistema de circulación, cabezal de acero inoxidable, 0,13 HP, 110-120 V, para calentadores de agua de tanque.

Received within 3 days, well packed. Happy with the purchase, much cheaper vs to other brands. Installed and connected to the tankless water heater hot water outlet without any issues. Bought 1 corrugated water connector 12" 3/4" from HD from tankless outlet to the input of the pump, installed the temperature regulator bypass valve as per instruction to the furthest distance from the pump. No leaking. I added the smart plug and connect the app to my phone, to turn on and off via SIRI. Very happy customer.

I can't comment on the whole kit as I only needed the pump itself. Pump works fine and the mixing valve looks like it's well made but I never tested it's function.

Bought this and installed it. Works great!!! I have home assistant controlling the pumps on/off time. I now have instant hot water at all my top-floor taps, no more waiting for the hot water. I should have bought this years ago

Works well but is noisy if mounted directly to rigid galvanized pipe. I wish that one end of the pump had a 3/4" female union connection instead of male at both sides. I ended up installing it on the hot water tank outlet with a flexible connector from the pump to the house piping. Use a dielectric connector or lots of teflon tape on the pump nipples as stainless steel could pit in contact with copper fittings. Very good value all the same.

Great pump for a good price. The only complaint I have is that while the pump does come with various required fittings to support installation (including reducers for different size pipes), the inbound water side of the pump has a male fitting. Unfortunately, you typically require a female to female coupling to attach it to the outbound fitting on the water heater. I had to go to the hardware store to get the required coupling to install the pump. In looking at other manufacturers pumps they typically have a female fitting on the inbound side of the pump. I would suggest that you either include this commonly required fitting with the pump or redesign your pump to have a female fitting on the inbound side. Thank you.

Installed and seems to work fine. Timer is nice function so not running 24/7. My concern is the pump housing reads 165 degrees F while the water temp is only 120. I have contacted Vevor to see if this is acceptable and have yet to receive an answer. The directions are worthless. Between the poor English and the lack of details, best to throw them out. For US, most hot water heaters have a male discharge pipe. So, you will need to get a 3/4 inch female pipe union with a quality pipe tape. More $.

Worked great for 2 months, but now it has weird noises when it runs. And trying to get help at Vevor is well; if you have tried, you know what I'm talking about: a real circus.

There is something wrong with this set-up. The pump gets extremely hot as does the water even though the water heater is set on low(110 degrees F). The inlet water hose to the pump blew off after 5 hours use due to, I believe, the extremely hot water/pump. I have the pump unplugged as I'm afraid to use it now. Do you know what could be wrong?

They canceled my first order a few days later, most likely wasnt in stock. Then my second attempt says delivered in mailbox. Well its not there. Should I do 3rd times a charm?

Pump is very noisy