Reseñas de clientes para Bomba sumergible para pozos profundos VEVOR, 3 HP/2200 W, 230 V/60 Hz, caudal de 37 GPM, altura de elevación de 640 pies, con cable eléctrico de 33 pies, bombas de agua de acero inoxidable de 4 pulgadas para uso industrial, de riego y doméstico, grado de impermeabilidad IP68.

Es mi 2ª bomba igual, la 1ª me duró 5 años metida en el pozo, está algo mejor esta 2ª pero viene un poco incompleta, según mi opinión; aúnque el condensador de arranque viene incorporado en la propia bomba el guarda motor no lo trae, hay que comprarlo aparte, tambien el cable de alimentación es excesivamente corto solo 9 metros, le he tenido que añadir, eso sí me ha venido cinta aislante para su conexion, trae una cuerda de otros 10 metros para colgar la bomba, insuficiente para mi pozo que son 23 metros de profundidad. Despues de todo esto, de momento estoy contento y si me dura otros 5 años bajo el agua, está bastante bien.

Everything was as pictured thanks 😊

Worked excellent the first time I used it. I would buy again.

I purchased the VEVOR 3 hp submersible pump after my Well ran dry as an upgrade to my one horse pump and I’m very pleased with this upgraded Pump. It has worked flawlessly. I’ve had no problems with it since I installed it after having a new Well dug 120 foot deep. can’t be surprised.!

The pump was by far less expensive and it works great the flow and the pressure is more than what I expected got great use out of all ready

Price could be a little better, but we use it to pump river water uphill. Pumps about 500 feet horizontally, with a head (lift) of around 80 feet. Pressure tank holds it steady at around 80 psi when not in use. When in use, setup triggers pump on at around 65 psi, and off at about 80. When using it to run irrigation (about 15 sprinkler heads, around 60 gpm), the pump moves so much water, it will actually cycle the system, instead of constantly running, which is pretty sweet when you consider its max flow is 37 gpm. Read description carefully, as it is a 220v pump, meaning you'll need 2 legs of your single-phase system. At full load, it pulls just under 10 amps (5 amps per leg), meaning you could get away using 14 awg copper (stranded if running through conduit with lots of turns, solid or stranded if using UF wire), but because we were running such a long distance, we opted for 12 awg. Read on if you want to do the install yourself To do it yourself (if you feel electrically inclined), you'll need at least 3 runs of wire, 4 if you want a neutral in the box (not required for this). I usually add a neutral, just in case I ever want to convert it in the future to an outlet or something (using either only 1 of the legs, or using both on separate legs, with common neutral and double pole breaker on the other end). Choose two of the following colors to use as your hot legs: red, blue, black (if adding addt'l runs, use yellow, orange, purple). Next, if running a neutral, you'll need a white wire (for simplicity, we'll skip the banding option), then you'll certainly need a ground, which must be green. Assemble your conduit (you can get away with 1/2 inch (sch. 40), but if it's a long run, I recommend 3/4 inch (sch. 40) (not for underground use, if going underground, use sch. 80 and 3/4 inch pipe). If using UF wire, simply bury it in the trench following depth guidelines. Before filling in all the way, add a line/run of metallic "buried electric line" tape about 8 to 12 inches below the ground. Use wire lubricant when pulling, it makes a difference (trust me). Use a vacuum or similar to "suck" jetline through the pipe (use a grocery bag or similar on the other end). Next, attach mule tape to the jetline and pull that through, or if you're confident you can get it through, using mule tape attached to the bag. You'll attach your wires all bundled and taped to the mule tape, then using lube, you'll pull the wires through the conduit using the mule tape.

great product

Works perfectly

Was very easy to set up and we had it all working in 2 hours . This was a blessing we had been without water for almost a week. We have livestock and had to hall water.

I installed this pump almost a year ago! I had installed one in 2022 it was a different style pump and it lasted about a year and a half at 330 feet deep. It was a vevor 3hp pump but it was their old style. This is an improved style and I've noticed it soft starts much better! It produces gobs of water and I think this is this pumps downfall. I get 20-25 gpm from this pump at 330 below the surface. All is from 1 1/4 inch line. Easy to install