Reseñas de clientes para Cabina de arenado VEVOR de 40 galones, cabina de arenado portátil de sobremesa de 40-120 PSI, arenadora de acero resistente con pistola de arenado y 4 boquillas de cerámica para eliminar pintura, manchas y óxido.

Arrivé rayé

JUST RECIEVED SHIPMENT, AND AT FIRST GLANCE DOES NOT LOOK GOOD AT ALL. ALL HARDWARE IS RUSTED AND CAN BARELY OPEN CLAMPS HOLDING THE DOOR.

Very cheaply made but does the job. If I was needing to use it more often this would not be the cabinet to get.

Cabine bien reçue... je la monte actuellement... jolie et s'assemble assez bien ! Par contre pour un tel tarif, le nombre exact de boulons serait bienvenu ! Il n'en manque pas beaucoup ( 8 pour maintenir correctement les pieds ) mais assez que je je sois obligé d'aller courir chez la boutique brico à quelques km de chez moi ... c'est dommage ....

CONS This came in kit form so a lot of patience is needed, as provided instructions are seriously lacking in detail. The attached photo shows the provided instructions for assembling the electrical wiring and light. The instructions just say "Assemble" with a drawing with little other details and this is not the only such instruction. PROS It looks like a sturdy cabinet and once I finally sort out the assembly I'm sure I will be happy.

Cannot get it to stop leaking sand. It has a dust collection system on it to help with cabinet pressure but with the supplied sealant plus some and heavy duty metal backed tape it still finds a way to leak out my expensive media. Lighting is very minimal I had to add lights to see in cabinet. If you are expecting to upgrade from Harbour Freight cabinet they are very comparable. And I know you get what you pay for. Really my first purchase from Vevor that I am not satisfied with.

I bought the 60 gallon cabinet. The instructions are basically a reference and are lacking detail. Multiple panels were bent and scratched, but straightened out easy enough. The self tapping screws for the glove rings are junk, I opted to use 8-32 screws and nuts instead, practically all stripped out when trying to install. The foam sealant seems to be decent quality and is adhered well. The funnel section had two flanges not quite bent to the right angle. The light is cheap, but works, will probably end up replacing it anyways. I didnt use the gun that came with it, so I can't comment on that but it feels cheap. Be prepared for a long assembly time. Overall it'll work, but I expected slightly better for the price point.

Bought this thinking it would be good for what I needed, I have replaced the viewing window 4 times already, this cabinet leaks everywhere even after using silicone to try and seal edges. I would look for a different cabinet if you dont want to replace the viewing window after every use.

It’s mediocre, but does the job. It’s fairly light weight, and the materials are a bit less robust than they probably should be. The assembly instructions are nearly useless, and are written incorrectly in a few spots, especially when it comes to the viewing window. Reference the picture online, not the picture in the instructions. The seals could be better, it leaks a little dust. The suction hose it came with is trash, it was kinked in the packaging and collapses horribly when in use. Expect to attach a shop vac to the side wall port or you’ll have a mess on your hands. It helps a lot to keep the dust down. For the price, it’s alright, but should probably be a little lower than it is. They shipped via Fed Ex, and it wasn’t even picked up until the day it was supposed to be delivered. If you want something basic for occasional use and won’t be using it in any kind of mass production environment, then it’s suitable for sure. Anything beyond that, buy a professional one. Yes, I would still recommend it to friends or otherwise looking for one, and I would buy it again. I’m just giving my honest opinion about it and what I’ve encountered.

Cabinet works great with a few modifications. But good luck getting replacement filter for the dust collection system and replacement liner for the window