Reseñas de clientes para Cabina de arenado VEVOR de 40 galones, cabina de arenado portátil de sobremesa de 40-120 PSI, arenadora de acero resistente con pistola de arenado y 4 boquillas de cerámica para eliminar pintura, manchas y óxido.

Hat alles super funktioniert!

Très satisfait de cet achat qui correspond bien à mon besoin. Le montage initial doit être fait avec attention pour ne pas perdre de temps. Pour ma part, j’ai ajouté un joint sur toutes les pièces pour limiter au maximum la poussière dégagé par le sablage. Pensez à acheter un embout standard pour connecter l’unité de sablage au compresseur. Une fois l’ensemble prêt, la mise en route et l’arrêt de font rapidement.

Blästrar fint.

Works great. Glad I purchased vacuum add on.

I would highly recommend checking out a couple youtube videos on modding these Vevor blasting cabinets. A few simple changes and you can add your own air gun inside for cleaning the blasting media off your parts. Another good addition (if you have room underneath) is a media pickup from below that has a valve you can open or close to really vary your media pickup. Apparently the metal pipe that comes with the kit clogs often and doesn't work too great. I never tried it out myself so I cant confirm if that's the case. Lastly would be a vacuum or dust separator. There is a hole at the back of the cabinet for this purpose - you'll just need to drill your own mounting holes. I ended up buying a dedicated small shop vac with HEPA filters to use as my dust collector, but there are much better alternatives out there. As for the product itself straight out of the box, it could have been better. Both side panels simply did not line up properly and required cutting a few ends down so they would fit into place and have the holes line up. This was minor to accomplish but annoying as hell. The manual is straight out of China with very broken English. The pictures are easy enough to figure out and the packages of screws are well marked for each task just remember to put the included gasket sealant between all panel pieces! I realized that mistake half way through assembly. Check your blasting gun over. In the media inlet, the metal casting had actually covered over the hole at the top of the inlet on the gun. Had I not noticed, it would have never picked up anything at all. Fortunately the offending metal was thin enough that a few good screwdriver strikes was able to pierce through. I worked at it long enough to open it up like it was meant to be. Overall, the build of the cabinet is very decent. Once some little tweeks are added, the whole thing fits together nicely and feels very solid. If you're on a budget and willing to put in a bit of extra work, you can get yourself a very capable blasting cabinet with this package. I am very pleased with my 40gal unit and would recommend to others - with the aforementioned mods.

Bought for the Men's Shed. This proved to be great for small items tried it after assembly and worked a treat on some rusty tools

easy to put together just has a lot of screws have a power tool it works great

Heavy duty. Does a great job and also you can see.

Packaged well. Easy assembly. Perfect size for benchtop use

Difficult to assemble as several pieces where not exact size to fit easily together, was able to pound into place with a large mallet. Slope of bottom not steep enough to use walnut and pecan aggregates. Good value.