Reseñas de clientes para Caja de acero VEVOR NEMA, 12 x 12 x 8', NEMA 4X, resistente al agua y al polvo, IP66, para exteriores e interiores, con placa de montaje.

"With our on-site teams in mind, it was a big decision when changing our approach to responding to reviews and shifting that responsibility to Widewail. Our partnership with Widewail has enabled BH to improve the way we do business. Instead of our on-site teams spending time crafting review responses across multiple platforms, they can focus on creating moments that matter and making improvements based on feedback."

I used these boxes as sub-panels for our storage unit facility. Each box houses a din rail with mini breakers to limit the power usage in each unit. The boxes worked great and our electrician that did the install was very happy with them. I'll be swapping out the standard key with custom key to keep people out of them.

Very good quality for the price, the only thing missing is some kind of option to get an optional set of key and lock . In some application, we need to source the lock from a different company . I wish it was available from Vevor

i had tried this product for my project and found it perfect for my need. i have completed adding my components to the first one i purchased from you. it worked so well i purchased another 11 enclosures from you.

This electrical box is an excellent buy, good, sturdy design, great price. Only negative I can see is that the lock is a bit simple with a key that looks like it's made of plastic.

Very hard to find a large heavy duty metal box like this that doesn't cost the earth. Well made, nice and square with no sharp edges and comes with weather proof door seal and gasket.

Just want to say.... I was pleasantly surprised when i open the box and saw the quality of the enclosure. The price was right, and i will be purchasing additional panels in the future. i have already recommended to several of my associates. Thank You

The box is well built and it's really a good design. I really like the cooling fan and the ventilation. However, there are a few flaws to this design. First of all, if this is an outdoor enclosure, it should be bug proof 100%. Yes, there is mesh for the side vents on the inside of the enclosure, but then there is a big gaping hole at the bottom of each vent for flies and other bugs to go live in there. Over time bugs going in there to live and make nests and all that we'll plug up the mesh screen. So there should be a mesh screen at the bottom of each vent where the big gaping hole is for air to flow through as well as one on the inside of the enclosure. And same with at the top where the fan vents out. There's little slotted holes for the air to go out of the enclosure from the fan. And there is a mesh screen between the fan and this little opening where the air blows into. But again flies and all kinds of other little bugs are going to go live inside of there. So where the little slotted holes are there needs to be a mesh screen covering that as well. So no bugs can go live anywhere in this enclosure. Also there are pre-drilled holes for mounting hardware. There's two at the top of the enclosure and two at the bottom. The metal insert that comes with the enclosure is too close to the bottom holes for the supplied nuts and bolts that come with this kit. The nuts that come with it are huge and the holes on the bottom are too close to the insert for these knots to even have space to spin and tighten on. Let alone get a socket bit on there. The top holes are okay. I was able to get the socket on there. But I had to use smaller nuts and bolts for the bottom holes. It would just make sense if the

Good quality easy to install. Good quality for the price. I have a 15A powerpoint wil a meter to monitor the amount of electricity I use to charge my car.

La réalisation du boîtier semble être de très bonne qualité. Le joint est ferme, ce qui laisse présager une parfaite herméticité de l'ouverture du boîtier. Il y a cependant quelques points de vigilance à retenir : - Les trous ne sont obstrués que par des capuchons en plastique blanc. Si les 4 au dos du boîtier seront obligatoirement ôtés pour le fixer à un support, et les trous comblés par la vis qui va traverser chacun d'entre eux, ainsi que l'écrou intégrant un joint caoutchouc placé à l'intérieur du boîtier, les 2 sur la face avant permettant d'inverser la position des charnières restent obstrués par ces mêmes capuchons en plastique de façon permanente, uniquement emboîtés dans le trou. Il n'assurent aucune étanchéité et l'écart entre la porte et leur emplacement est suffisamment grand pour laisser passer l'eau, même par simple ruissellement. Il faudrait utiliser ce boîtier annoncé IP65 dans un endroit protégé pour assurer l'absence d'infiltration d'eau, ce qui est plutôt illogique. - L'ouverture du bas sur laquelle se fixe la plaque à usiner, pour placer des presse-étoupes par exemple, est légèrement surélevée par rapport au bas du boîtier. J'imagine que cela permet d'éviter l'infiltration d'eau par capillarité, mais cela créé également un petit volume à l'intérieur du boîtier en bas dans lequel l'eau qui s'est infiltrée peut stagner et aboutir à un fort taux d'humidité fatal pour les équipements qu'il renferme. Un petit trou d'évacuation de cette eau est à envisager, même pour évacuer uniquement la condensation causée par la différence de température entre l'extérieur et l'intérieur du boîtier. - La plaque fournie pour fixer les éléments qui seront intégrés dans le boîtier ne permet pas de bénéficier de toute la surface disponible à l'intérieur. J'ai redécoupé une plaque alu un peu plus large qui s'insère également sans problème dans le boîtier. En résumé, je ne suis pas très confiant quand au sort de l'électronique (nœuds LoRa et Meshtastic) que je vais intégrer dans ce boîtier, qui sera fixé en pied de mat d'antenne TV, en bordure de toiture, face aux vents dominants. J'espérais obtenir quelque chose de plus durable et tout aussi efficace qu'un boîtier Plexo...