Reseñas de clientes para Caja de entrada de generador VEVOR, caja de alimentación de 50 amperios, caja de entrada de alimentación SS2-50P, caja de entrada de alimentación de 3 clavijas 50 A, caja de entrada de alimentación de generador de 120/250 V, caja de generador de 12500 W, cajas de entrada con certificación ETL de 10 AWG para uso en exteriores

Generally, pretty good quality and price. The only issue I had was that the KO plates are not US industry standard sizes, so they must be KO punched or use reducing washer on a larger size. Also, the covers screws are small and low quality.

It does the job. Be careful making the electrical connections ensure that they are tight. I had to slightly enlarge one of the included connector adapters, it did not fit the standard size connector. The cover does not have any of the typical ways for holding itself shut except for gravity or a padlock which is inconvenient to access. Have used it carrying 32 amps for many hours and it does not get warm. So from the electrical perspective I guess it's good. Overall, I am okay with it.

These work much better than any other brand we have tried since they have a greater depth for the RV cord "handle. That makes it so that the lid can close all the way even with the RV cord in the receptacle. We do not care for the knockout plates that come with these. Anyone that can install the wiring for one of these should be able to make a knockout. I wish VEVOR would just eliminate all knockout plates and gland plates on their electrical enclosures.

It should work just fine to hook up my travel trailer outside once in a while :)

la boîte de prise de courant est exactement ce que je cherchais. malgré un léger problème de plaque que j'ai réglé, le tout est parfait bien que pas encore installé.

Vevor 50A RV Power outlet NEMA 14-50R. Good unit and covers the 90 degree plug well. Mine came with the square block off plates AND 3 different plates with "knockouts" - so everything included. The wire lug holes at the back of the receptacle face down, so I decided to come in from the bottom with EMT for ease of installation. Even then, with 6AWG RW90 (THHN in the USA) there wasn't much room get wires tucked in to get the receptacle installed, but the box and cover plate are pretty solid, so they can handle some force, unlike some thinner metal gauge boxes I've dealt with. All in all, a good item and well worth the cost.

This box was a few dollars cheaper than others. It shipped from Vevor in California. There is a 4 position ground bar inside and it has metal plates that cover the entrance holes which are 1". There are adapter plates for smaller sizes. However, there are only 3 cover plates and 4 holes; so if you want to enter from the back and cover all the side holes, you will be one plate short. Also, the inside of the box was not painted. I painted the inside of the box, drilled a hole in the back and fabricated an additional cover plate, as my cable was entering from the back of the box.

Bon produit, un peus petit et facile a roullir.