Reseñas de clientes para VEVOR Kit de herramientas de sincronización de carburador y vacío de combustible, sincronizador de carburador y vacío de combustible, juego de medidores de sincronización de carburador con manguera de goma

Top merchandis

Great units, needed taps to reduce flutter, I purchased these from a pet shop. For aquariums.

Parfait , je recommande vraiment . Utilisé sur 600 hornet

Ciao consegna ricevuta per il giorno definito, gli strumenti sono perfetti grazie per la serietà nei miei confronti

It was fine. Shipped & received faster than I thought it would. Bought some extra tubing to sync the gauges cutting 4x3" & 3x5" pieces. You will additionally require 3 "T" connectors for this. Since virtually no real instructions, you need to gently remove the glass and Blow not Suck air - using a compressor with minimal airflow works best, to expose the hidden screw that appears and synch gauges to each other, Keep the setup for future gauge sync'ing. I cut 3" each from each of the supplied hoses and the other 5'' sets from the piece of vacuum hose I bought. The connector pieces for the carb inputs were perfect for my old motorcycle and the newer bike did not even need any. That said, if you have to dig for attachment nipples, attach some lengths of hose permanently for future sync'ing using a "T" and a cap to connect them together when not in use. Hide them away under tank / seat. Also, if you can get appropriate fuel line extension to connect to the gas tank and strap it to the seat, you can avoid the whole extra petrol container thing which of course just varies from bike to bike... When syncing, just back up off without overturning the adjustment screw for steady readings and you will be done pretty quickly. Good value. Nice kit.

La verdad que me sorprendió tanto la calidad como la velocidad del envío. Voy a repetir con vector seguro!!

Used on a motorcycle and worked as intended, need to close the valve so it reads smoothly, but a must in the carb sync world!

Fungerer til det den skal den!

Easy to use, good value for the money!

Vielä en ole käyttänyt, mutta vaikuttaa laadukkaalta. Yksi mittari ei ollut ihan nollassa. Piti irroittaa ruuvimeisselillä vääntämällä lasia paikallaan pitävä kehys, jonka jälkeen pääsi mittarissa olevaa säätöruuvia kiertämään. Sillä sai viisarin keskelle nollaa. / Haven't uset this yet but seems to be good quality. One ot the gauges was a bit off from zero. Had to pry off the rim which is holding the glass to have access to the adjusting screw. Now set to zero.