Reseñas de clientes para VEVOR 20T/44000LBS cilindro hidráulico hueco Jack de 100mm émbolo Ram cilindro sólido hidráulico Jack hidráulico para coche/furgon/ barco/camión/caravana

Well made but the pictures for the RCH-30100 shows a shorter cylinder. Mine is way longer than the one in the pictures. The specs say it weighs 30 lbs but it feels more. I will weigh it to find out. Total length with the tip is actually 10 inches and 1/8.

Perfect product, fast delivery great quality, recommend 100%. Bought It with a foot pump as well, both work perfectly.

excellent produit pour extraire des chemises des cylindres, nécessite d'avoir une pompe adaptée et de faire un montage

Bonjour, Je vous serais reconnaissant de bien vouloir me faire parvenir la facture correspondant à cette commande N°23022400926412353007 [email protected] Cordialement

Preis und Leistung sind Perfekt!!! Beschreibung könnte besser sein. War nicht ganz ersichtlich, dass der Zylinder hohl ist.

Lieferung alles in Ordnung, Zylinder erfüllt die Funktion, jederzeit wieder! Hub größer wie beschrieben, bis 25 Tonnen getestet!

Ottimo pistone idraulico

Only one star on "easy to use" because it is said to be 66 mm inside. Perfect for me as I was about to pull out a 50 mm axle on an excavator. But it isn´t 66 mm inside. It is only 35 mm in the ends and 33,5-34 mm between the ends, meaning that I had to use longer pulling bars and some 50+ mm inside diameter thick wall tubing (pictured) to get the job done. This is costly but Vevor refunded me 30% to compensate for this. But what worries me is that Vevor hasn´t updated the product specifications even after two weeks. How many more products have the wrong specifications just because Vevor doesn´t know how to make a simple measurement? And even worse, how many more products still have the wrong specifications after their customers has filed a complaint? Only four stars on quality because the hydraulic port doesn´t have a ground flat for a Tredo sealing washer. Yes, you can use liquid thread sealant which I did, but a ground flat and a sealing washer is the preferred method. And PTFE tape is absolutely forbidden in hydraulics. The reason for this comment is that the cylinder is supplied with a Chinese hydraulic connection that isn´t used in Europe so you have to change the connection. The thread is female R3/8" if anyone plans on making the same modification. But once the above has been solved it does the job and that´s the reason for five stars on "Functions". I strongly recommend buying a hydraulic pump as well because using a 30 ton cylinder with a manual pump isn´t exactly a joy. I had to work really hard for each pump stroke to achieve a one mm move of the axle I was pulling and the axle was 320 mm long. You do the math! 😊 It ended with me buying a hydraulic pump from Vevor as I have another three axles to remove.

It's very good but I was expecting a female end on the ram to join the male end on my pump

Good