Reseñas de clientes para Cortadora de azulejos VEVOR de 31 pulgadas, manual, de un solo carril con posicionamiento láser preciso, rueda de corte de aleación con mango ergonómico y reglas precisas. Para azulejos grandes de 0,24" a 0,59" de grosor.

I purchased this tile cutter for as I am doing my bathroom tile. The laser wasnt the best to use. Also, the tile saw kept cracking/braking my tile once I got towards the end. You needed to apply a decent amount of pressure for it to break evenly. A few taps didn't work for my tile. I have 5ftx3ft tiles and I wouldn't recommend this cutter for these type of porcelain tiles. Maybe smaller tiles it would work for. I ended up using just a circular saw with a very good diamond blade which made cleaner cuts.

The alignement of the cutter on the base is offset You have to align it and drill and grind the plastic at the end of the frame The frame is to soft When you cut and try to press to split the tile, the frame bind and it become hard to split I have to had steel piece under all the lenght the strength the frame After all that it's a good cheap tool

Quality is ok. But the middle flexes to much and doesn't score the tile. Other ones have support there. So I have to push down on the center section. Not fun. Wish I would have returned. Not a good long term solution.

Very good tile cutter but, the laser line it's useless under the sunlight, the alignment can't be relied upon. If it had a decent strong laser line which could be adjusted by user and a decent top ruler that is accurate, easy to see and long enough for large tile I believe it vould be a competitive tile worldwide. I did a decent job with it but by only ignoring the laser line and marking my tiles first using a tape measure. Despite all this if you are not a perfectionist then you will not find a cheaper cutter anywhere. Cheers

Not the best, have to make alot of adjustments to get straight cuts, laser is never aligned with cutter don't bother using laser.

Works well for shorter lengths. Lacks strength for larger 4 ft porcelain tiles. Tried several tiles. Scored fine, but did not snap along long scores. Ruined several $75 tiles. Works fine with smaller tiles, bar bends with larger tiles. Planning to return.

Katastrofe Mann kann nicht ein fliesen richtig schneiden Wenn mann ausdückt zum zerbrechen die fliesen komplet die zwei seiten gehen hoch Erlich gesakt nie wieder so was kaufen

Maszynka wygląda solidnie chociaż niedbale poskręcana.Tragiczny kontakt z firmą w sprawie brakującego elementu.Jesli doślą część to przetestuje narazie jest bezużytecznia

In the description of this article, It claims to be able to cut tiles from 6 to 15mm. We bought it for cutting Klinker Greco tiles which are 12mm thick. It was a complete disaster. It has broken and wasted so many tiles... We ended up cutting them with a small Ryobi circular saw that we already have. A total waste of money for us even though the price seems reasonable for a tile cutter. :(

Bei großformatigen Fliesen gibt es ein Problem: Beim Schneiden verbiegt sich die gesamte Maschine in der Mitte. Die Rohre sind nicht stabil genug, sondern etwas flexibel. Das finde ich sehr schlecht, da die Fliesen im mittleren Bereich dadurch nicht sauber und nicht vollständig geschnitten werden.