Seleccione el país/región, el idioma y la moneda que prefiera para comprar.
Cortadora de suelos de vinilo VEVOR de 13 pulgadas, cortadora de suelos laminados de 12 mm de grosor con ángulos ajustables de 15°/30°/45°, ruedas flexibles, mango telescópico, apta para ciertas maderas de ingeniería, LVT, VCT, SPC, LVP, WPC.

Reseñas de clientes para Cortadora de suelos de vinilo VEVOR de 13 pulgadas, cortadora de suelos laminados de 12 mm de grosor con ángulos ajustables de 15°/30°/45°, ruedas flexibles, mango telescópico, apta para ciertas maderas de ingeniería, LVT, VCT, SPC, LVP, WPC.

10-13 mm

Opiniones de los Clientes

Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
13 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
FILTRADO POR
Reseñas del Artículo Actual Filtros claros
13 reseñas
Traducir todas las reseñas a Español
Traducido
Ver original
nseitz22 nseitz22
Slight assembly but easy
10-13 mm
Used it for 800 sq feet so far works great very happy
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Dean Dean
LVP cutter
10-13 mm
Worked well for my flooring job. 2.5mm vinyl plank was easy to cut. Made the job so much easier and quicker.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
bob bob
mr.
10-13 mm
Instructions are difficult to understand. The worst part is using it. The handle should be on a 90 degree so we can push down instead of pulling it to cut
0 personas encontraron esto útil
Respuesta de Servicio al Cliente: Thank you for your feedback. We’re very sorry to hear about the difficulties you faced with the product.We have created a ticket for you to follow up on this issue. Our customer support team will contact you via email and provide updates until the problem is solved. Please check your inbox promptly for our messages.
Traducir reseña a Español
Traducido de Inglés
Ver original
Schipfi Schipfi
*
10-13 mm
haben bereits mehr als 100m2 damit verlegt, funktioniert einwandfrei, denk aber 12mm ist nicht möglich, wir verlegen momentan 6mm Vollvinyl und das auch schon Kraftakt, das tolle ist einfach das es keinen Dreck macht wie wenn man Vinyl schneidet
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Alemán
Ver original
shaun.s.rosenthal shaun.s.rosenthal
NOT HAPPY
10-13 mm
Not happy at all Brought this item only to find missing parts and I need this to carry out renovations on my home And still haven't received a parts or a replacement unit
0 personas encontraron esto útil
Respuesta de Servicio al Cliente: Dear Valued Customer, we sincerely apologize for the inconvenience this has caused you. We have received your ticket and have been in continuous communication with you regarding this issue. Please be assured that we are closely following up and will get back to you with a solution as soon as possible. In the meantime, kindly monitor the ticket responses and email alerts for updates.
Traducir reseña a Español
Traducido de Inglés
Ver original
glen glen
owner
10-13 mm
not what i thought it would be
0 personas encontraron esto útil
Respuesta de Servicio al Cliente: We have created a ticket for you to follow up on this issue. Our customer support team will contact you via email and provide updates until the problem is solved. Please check your inbox promptly for our messages.
Traducir reseña a Español
Traducido de Inglés
Ver original
Glenn Glenn
Cutter on Backwards
10-13 mm
Cutter on Backwards  3 Cutter on Backwards  3
Top cutter was resembled backwards. It took about an hour and a half to take it apart and put it on correctly. After that it worked well.
1 personas encontraron esto útil
Respuesta de Servicio al Cliente: Dear Valued Customer, We sincerely appreciate you sharing your shopping experience with us. Please rest assured that we will carefully review your comments and take them into consideration as we work to enhance our services. Thank you for your valuable feedback,it helps us improve and continue serving you better. Please, if you need more help, please head to our ""Contact Us"" page online,look for it in the bottom navigation bar. Submit a ticket there for any unresolved issues, and our after-sales team will work to resolve things quickly. We appreciate your understanding.
Traducir reseña a Español
Traducido de Inglés
Ver original
Alvaro Alvaro
Comentarios
10-13 mm
Buenas tardes,es de fácil manejo, pero para suelo laminado de 1cm de grosor no hace el corte limpio dejando astillas o con rebaba la placa a cortar. Por lo demás ligera y fácil de usar Un saludo
0 personas encontraron esto útil
Trond Fjelnseth Trond Fjelnseth
End user
10-13 mm
This product did not meet expectations at all. The assembly instructions were absolutely terrible. Hard to read and small print. The screws that came with it didn't fit - they were too long. The aluminum in the body was too soft so when you put a little pressure on it the screws gave out and the arm attachment was broken The ad said that the product could cut laminate up to 12 mm. It doesn't work. The knife is not good enough. It might work on thin vinyl flooring. I would advise my acquaintances not to buy products from their website.
0 personas encontraron esto útil
Respuesta de Servicio al Cliente: We have created a ticket for you to follow up on this issue. Our customer support team will contact you via email and provide updates until the problem is solved. Please check your inbox promptly for our messages.
Traducir reseña a Español
Traducido de Inglés
Ver original
Daren owen Daren owen
Would not recommend
10-13 mm
Bought it to cut 12mm flooring and the flooring just laughed at it, blade didn't even get half way through. The fixings for the handle needs to be rethinked as I would only imagine it would do a days work of cutting 6mm for it to break
0 personas encontraron esto útil
Respuesta de Servicio al Cliente: We have created a ticket for you to follow up on this issue. Our customer support team will contact you via email and provide updates until the problem is solved. Please check your inbox promptly for our messages.
Traducir reseña a Español
Traducido de Inglés
Ver original

Quien compró este articulo también compró