Reseñas de clientes para VEVOR Dobladora de tubos de 1-1/2" manual, dobladora de tubos cuadrados y rectangulares, dobladora de tubos de calibre 14, dobladora de barras planas de rodillos para acero dulce, cobre y aluminio.
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
53 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Work great
i pushed it to the limit (1'1/2 x 1/8 square tubing) and it did the work, its hard work off course but the job is done
1 personas encontraron esto útil
Traducir reseña a Español
Tres csolide
Une ttres bonne cintreuse je m en sert tres bien nickel je recommande se materizl thiery 62
1 personas encontraron esto útil
Traducir reseña a Español
Jj
Toimii
1 personas encontraron esto útil
Traducir reseña a Español
Przydatne narzędzie
Dobre narzędzie, przydatne do gięcia niewielkich profili
0 personas encontraron esto útil
Traducir reseña a Español
worth the money but not perfect, not even far
pros:is a very solid machine, easy to use if you don't have some industrial repetitive work (hundreds of pieces). spin the handle and the pipe is bending.
cons: for long pieces of pipe the machine will bend them slightly out of center, they have to be rectified after.the rollers for flat pieces have two rings with unfortunately one screw each. they will not stand with the setting until you finish the job no matter how hard you squeeze that screw. it can't bend 60/40/2 mm only 50/40/2 max witch is a BIGGG thumb down for it's size. there are smaller home made machine who do that.another conn is that the axel of the wheels use blocking nuts, everytime you change to another position you'll have to use other tools not the bear hand.the axel of the handel is locked with a safety ring and you have to have a special plyers to unlock it.
overall is a nice machine to have as a first bender or to use it as a model to build your own to your particular needs.
0 personas encontraron esto útil
Traducir reseña a Español
Piegatrice
Ottimo prodotto lo consiglio vivamente è molto resistente
0 personas encontraron esto útil
Traducir reseña a Español
Motorized
I have motorized my Vevor Tube bender, works perfect and no more cranking...
5 personas encontraron esto útil
Traducir reseña a Español
Works Great Out of the Box—Even Better with Custom Roller Covers
I bought this roller to roll 2"×1/4" aluminum flat bar the easy way, as it was the most affordable option. With a 3D-printed slip-on roller cover, I was able to match the exact profile I needed to keep the flat bar rolling evenly. It worked flawlessly for my application. Bending this material isn't overly difficult to begin with, but I needed a consistent, clean curve, and after some searching, this proved to be the most economical solution for the job.
2 personas encontraron esto útil
Traducir reseña a Español
Piegatura ottima
Fantastica ho fatto tanti progetti
0 personas encontraron esto útil
Traducir reseña a Español
Très bon produit
Produit conforme à la description, de bonne qualité et facile à prendre en main, je recommande.
0 personas encontraron esto útil
Traducir reseña a Español