Reseñas de clientes para Eje de TDF VEVOR de 1-3/8", eje de transmisión de TDF para tractor de 6 estrías, eje de transmisión de TDF con extremos redondos para implementos, eje de TDF para tractor serie 4, eje de TDF para desbrozadora de 43"-61", negro, para cortadora de acabado y cortadora rotativa
1100 mm
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
279 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Daniel Westrick
800 mm
Came as described, came as promised, Good service and Quality , It was prompt and fast. Would buy off of them again.
0 personas encontraron esto útil
Traducir reseña a Español
JCtheWizard Property Owner
The PTO shaft - was my first order through Vevor - everything about the order was perfect; the pricing was amazing (1/2 the price), it was shipped quickly without damage.
The forks are strong and fit over the lip of the tractor bucker well - their is a minor manufacturing flaw and a design flaw:
One of the tightening bolts threaded connector to the fork is welded incorrectly causing the side of the bolt to rub against the side of the fork bolt chase see image).
The fork screw -down clamp bolts look like they are supposed to have flat contact surface that 'should' allow the bolt to tighten without causing the round contact surface to 'walk' on the bucket. This is a problem and a better contact point could easily be designed that would not walk on the bucket surface (a design that would allow the bolt to tighten without the contact surface turning with it). However, with that said, I greased the bolt into the nut/contact surface and left the bolt about 3/8" from the contact plate which allows for the contact surface to better seat while tightening down the bolt - the contact surface still walks on the bucket, but not as much.
1 personas encontraron esto útil
Traducir reseña a Español
Tim from Maine Huge stress relief for me with wood chipper.
800 mm
This is just what I needed. I have a wood chipper and was breaking shear bolts every few minutes. I dealt with that for a month or so and then ordered this unit. Worked perfect and as described. Fast shipping too. Well worth the prices that it is. It rescued my blood pressure from all the headaches from the shear Type.
1 personas encontraron esto útil
Traducir reseña a Español
outdoordad works great!
800 mm
Finally got it hooked up to my tiller and worked like a champ. Great price, seems good quality and no issues hooking up. Seems winner all around. Just started using, so all fives so far.
1 personas encontraron esto útil
Traducir reseña a Español
Bruce Owner operator
800 mm
Came as expected EV use good quality
0 personas encontraron esto útil
Traducir reseña a Español
Douglas Henry ......
Very good for the price
0 personas encontraron esto útil
Traducir reseña a Español
RonnyK Tractor PTO Shaft
This is a quality shaft for the money. It is working out great.
0 personas encontraron esto útil
Traducir reseña a Español
Pto Perfect
As described works great for my brushhog. Thank you vevor for another great product. Couldn't brush hog for less
0 personas encontraron esto útil
Traducir reseña a Español
Leee Ranch Mgr
It’s worked just fine.
0 personas encontraron esto útil
Traducir reseña a Español
John Farm
800 mm
This was a highly expensive part elsewhere. Fast delivery…………………………………………………………………………………………………………..
0 personas encontraron esto útil
Traducir reseña a Español
