Reseñas de clientes para Elevador de motocicleta VEVOR, gato de tijera de 500 kg con plataforma ancha y pasador de seguridad, soporte de manivela de elevación central de 9,4 a 35,5 cm, gato de tijera de acero para motos de calle, cruiser y de turismo

This thing doesn't fit under my 12" height 2027 Suzuki DR-Z4s. The marketing is very deceptive. They show and say it will life a motorcycle? How? The lowest this thing goes is 14". How many motorcycle have 14" of clearance under them? What a waste of $ and it's a pain in the butt to put together. I do not recommend. Deceptive advertising at best.

I've used this Item for about 10 times and has failed, this item is useless and I do not recommend to anyone.

Jack is broke.

Qualité très médiocre, matériel assez faible, tout bouge dans tous les sens même en ayant serré tous les boulons, le cric est instable et la pédale ainsi que la molette pour le faire descendre sont mal mis et pas pratiques du tout. Je ne pense pas qu'il va durer dans le temps

What I liked was the promptness of delivery, the communication level of contact throughout the process. Packaging was also good. What I don’t like is the poor build quality and lack of attention to detail. When the article arrived, was unpacked and assembled, there were parts missing. No means of securing the release shaft to its screw. Then the foot pump either didn’t raise the platform or barely worked at all. The pump was losing pressure and wouldn’t raise the platform with normal operation.. Rather than return it to the mainland from Tasmania, I took a look at what might be causing the problem. Here is what I found.. The screw on the release valve seemed to work ok but the foot pump shaft itself seemed very loose in its mount. The problem was in the thread fitting guide nut which screwed into the base plate and through which the plunger passed was loose and had been jammed very tight, probably to compensate for the poor fitment at assembly time. Thread tape and reassembled and now it is working ok. But not great. This reflects poorly on the product and the company and proper quality control would have caught it early before becoming the customers problem. A customer should not have to carry the burden of poor workmanship upon receipt of the goods at any time. I’m scarred by this purchase and advise those considering a purchase of this model to be very suspicious of these things I mentioned above. I eventually got the jack I paid for but not without fixing its problems first.

Erster Eindruck: Rahmen krumm, Gewinde nicht ordentlich geschnitten .... absoluter Chinaschrott.

Pump away but it doesn’t lift, foot pump is a poor design

received the motorcycle jack stand and noticed immediately that there were fragments of plastic in the packaging. After looking though things and putting it together (very simple) I found that one of the plastic wheels was partially shattered. Sort of shocked that they would use such a cheap wheel for something rated to 1500lbs. I have reached out to support to hopefully receive a new wheel.

The motorcycle lift table arrived in a pretty beat up box that seemed to be rolled down a hill before dropped at my parcel box. It was certainly a heavy item that requires a sturdy box/packaging. Unfortunately one of the swivel wheels was badly so that it would not roll at all. There were also a few nuts/screws just floating around in the packaging. I have reached out to support to hopefully replace the badly bent wheel with hopes that I can still use the product. The product seems like it could be great---we shall see. I actually received the motorcycle jack stand as well for a heavier bike and it arrived in a similar way, but with a partially shattered plastic wheel. 2 for 2 broken items was not my hopes for the day.

malheureusement ce produit prometteur n'est pas adapté à ma moto et je pense à beaucoup car il faut un dessous de moto bien plat pour que tout cela reste stable ; demande pour retour en cours