Reseñas de clientes para Elevador magnético VEVOR, capacidad de tracción de 880 lb/400 kg, factor de seguridad de 2,5, neodimio y acero, imán de elevación con liberación, imanes de elevación permanentes, imán resistente para polipastos, grúas de taller, bloques y tableros.

It really works great on steel, but on sheet metal it doesn't hold well. I do recommend it as it is very strong on steel surfaces.

Se ven muy bien y bien terminados, la palanca de magnetización un poco dura. Todo bien ********************************************************************************************************************************

Se ven muy bien y bien terminados, la palanca de magnetización un poco dura. Todo bien ********************************************************************************************************************************

This is a good heavy duty magnet, but is doesn’t work well for thin sheet metal, it pulls off easily. How ever with heavier metal 1/8” or thicker, you can’t pull it off. I purchased it to put up a Quanset hut, and it was not able to stay on the thin metal.

Magnet was easy to put together and easier to use. The plasma cutter was easy to assemble but did notice some quality errors as the plastic nut on the base of the plasma torch was cross threaded I was able to make that a quick fix though.

Works great handle screw came out pretty easy but other than that haven’t had any issues all around function works great

Works great on 1/4 or thicker 4x8 sheets. Any thinner the sheet well flex and fall. It must be placed dead center. If it's on an angle it will drop it.

Overall, a great value. One concern is that we had two magnets purchased pull tested by third party. Magnets advertise a 2.5 safety factor, which would have a breakaway point of 2200lbs. One of the units tested achieved 1900lbs, the other was 1700lbs. Not a huge concern, as they both tested well above pulling capacity, but we will monitor as they are re-tested every year. Only other concern is lack of spare parts availability. We use magnets on daily basis, so components need to be replaced periodically.

Hab einen Kleiderständer bekommen

I don’t think this is capable of lifting the advertised weight. If it can, then I must be using it wrong. I tried several times to lift a plate vertically, and each time the magnet would slide off. The plate is approximately 400lbs. I also tried to lift the plate flat, and it would hold for a moment then let go. To be fair the metal I am lifting has surface rust so perhaps the metal needs to be clean first. I respect its boundaries and it works well when I do that.