Reseñas de clientes para Extractor de aire para ático VEVOR, ventilador solar inteligente de 35 W con control automático de temperatura, flujo de aire de 2400 CFM, motor de CC sin escobillas integrado para refrigeración y deshumidificación, sin control remoto.

The VEVOR 35W Smart Solar Roof Ventilation Fan Auto Temperature Control, 2400 CFM was exactly what I needed for my attic cooling application. Solar only, the fan operates as I need to move air through my attic to cool throughout the day. It is an all-metal enclosure and flange which will make it last versus plastic models seen elsewhere for higher prices. It is certainly something I would recommend to someone looking to do the same application.

The VEVOR 35W Smart Solar Roof Ventilation Fan Auto Temperature Control, 2400 CFM was exactly what I needed for my attic cooling application. Solar only, the fan operates as I need to move air through my attic to cool throughout the day in Florida. It is an all-metal enclosure and flange which will make it last versus plastic models seen elsewhere for higher prices. It is certainly something I would recommend to someone looking to do the same application.

Colis bien reçu et en bon état. A voir quand il sera en fonctionnement.

Seems to be working out well.

Great product

These are definitely worth the price. These are awesome. They have 4 speeds and the solar panel can power it without the power brick plugged in. They are also very quiet. The only problem I came across was the fact that in my manufactured home with no attic access it's against code to run power in the attic so I will need to install attic access doors to each of them.

These are awesome. They have 4 speeds and the solar panel can power it without the power brick plugged in. They are also very quiet. The only problem I came across was the fact that in my manufactured home with no attic access it's against code to run power in the attic so I will need to install attic access doors to each of them. These are definitely worth the price.

Received it pretty quick with no issues. Did a little test and put it out side and as soon as the sun hits the solar panel the fans comes on but any shade it turns off. Easiest part is no wires to hook up, just runs while sun hits the panel. Only time it will not run is when it's in the shade or dark or under a certain temperature so in winter in it won't run unless it gets to a certain degree.

So far so good ! Installed about a month to go ! Easy to do , use bottom support plate as template and make circles pattern then use drill to make a 1/2 hole on within circle ⭕️ pattern then use a sawzall to cut out shingle pattern (no need to remove shingles!) After remove shingle pattern (circle cut out) lift up some of top shingle to allow the support plate to go under them! Put roof cement or silicone and screw down plate and trim shingles to go around support plate (note some of support plate will be showing ) Caulk under shingles to secure them ! All DONE

El usuario pensó que el producto era muy bueno y le dio una reseña de 5 estrellas.