Reseñas de clientes para VEVOR Extractor de miel manual, extractor de miel de 3 marcos, extracción de apicultura de acero inoxidable, tambor de panal con tapa, equipo de centrífuga apiario con soporte ajustable en altura

My frames were slamming against the crank assembly so.. I had to cut about a half inch off of the shaft on the basket assembly (lowering the basket to make more room at the top). Now, it works.

It is a good low end extractor. The feet on my extractor has broken off after the first use. That is easily over come. I'm just concerned with what will be next.

This unit will work for 2 deep frames or 4 medium frames. For a small scale operation it works okay. Assembly was easy. Pros are the price. Cons are that if you are using a screen sieve on top of a 5 gallon pail to collect the honey you will need to set it on 2x4s or the gate won’t be high enough to clear it. Not a deal breaker. Instructions suggest bolting the legs to plywood but I used it without doing it. You do not have to spin the frames fast in order to spin out the honey. A couple of minutes per side is all you need.

Our extractor arrived quickly, and works wonderful, but when it arrived one half of the lid was broken into pieces. I took a picture and emailed it in, but never heard a real back. It would be nice to have the lid completely in tact, if pos

Honungsslunga. Gnisslar efter ett tag och rätt jobbig, men fungerar.

Tut das was sie soll

Legs way too flimsy. First use two of the tree leg that were bolted to the floor broke. Other seller use sturdy steel...not thin stainless sheets for the leg that are rocked when you extract your honey. Please Vevor upgrade...I will still use it but without the legs. will cut a hole in a pallet and insert it.

Bad customer service no free return

They cut corners with the gear design which results in the gear ratio being wholly insufficient for a hand crank unit. It is virtually impossible to turn the basket when filled with 6 full medium frames. After considerable effort to get the basket spinning, there is hardly any useful coasting momentum compared to a variety of other hand crank extractors I have used. I was super stoked to try out this radial configuration but the design limitations end up making the unit virtually useless. Too bad Vevor didn’t make an add-on electric motor for this one. Assembly instructions are incorrect and also insufficient, containing zero detail on bolt/nut/washer order and orientation with odd numbers of some pieces that make you wonder if there are pieces are missing.

The extractor is ok if you're using it for commercial or langsroth frames but doesn't work for national frames that we have in Ireland and the UK. I bought in error and tried to process a return and heard nothing from them, which is the reason for the low rating. I have since altered the extractor to work with my frames but wouldn't recommend it unless you're comfortable with cutting, welding and passivating stainless steel.