Reseñas de clientes para VEVOR CH-60 - Perforadora hidráulica de 31 dientes, perforadora de fuerza, perforadora suave para placas de hierro, barras de cobre, aluminio y acero inoxidable

Amazing time saver. Wish I had this 10 years ago. Multiple dies can be purchased fairly cheaply. Pays for itself the first job.

Wicked little punch for the price. Doing a commercial construction project that I need to hang various lengths of angle iron. Rather than paying for take off and fab cost decided to buy 20' sticks and fab onsite. Punching 1/4" and 3/8" angle iron. So far ~200 holes flawless. I'm about half done. The ch70 and GYB-63D 750w 10k psi Vevor hydraulic pump paired beautifully plug and play and are paid for in the cost of having the iron fab'd by a shop. And I'll have a punch for future. WELL worth the price. Punch a hole in 5-10 seconds vs minutes drilling, I'd probably have spent at least half the cost on drill bits.

will punch a 3/4 hole though 1/4 plate all day long when paired with vevor air hydraulic pump. saves alot of time drilling

Did as advertised outside of the box. Worked first time. Alot of flex when pressing but it's expected.

This punch is very well built and is detailed nicely. My only complaint is that it is difficult to determine which fittings are required. No details were included in the literature. I ended up ordering fitting/adapters for US, British and Chinese. I believe I now have the required fittings/adapters. If only the small manual that came with punch had that information, I would have saved several days searching.

CH 60, Punches 1/2" 6061 / T65111 aluminum like it's paper. Used a hand pump with 1 hand and punched 5 holes with no real cleanup compared to drilling. Wish I can find resonable priced punches. Seems like the ch70 has better less costly options than the ch 60. Not sure what hydraulic connection they provided, but I swapped to a more common connection to match my Enerpac 10k hand pump.

Couples up really nicely with the air/hydraulic pump, punches a nice clean hole. And surprisingly quick.

I've been drilling holes and finally found the hole punch, wow what a time saver. I've only used it for a dozen holes, so I'm not sure how long it's going to last.

Excellent product, quickly punched 180 holes in 1/8" plate and angle iron. Much better than drilling!

Good evening: I'm using the CH-70 punch press with dies I bought from AliExpress. I have to say they're quite poor quality; several have already broken, but I can't find them anywhere else to buy. Today I started punching 4mm stainless steel plate, and two 5mm diameter dies broke immediately. The first time, the hole was made, but the second time, not only did it fail to drill, but the die broke and bent the plate. To try and straighten the plate, I removed the die from the punch press, screwed in the punch press's locking mechanism, and placed five 4mm wide plates on the base of the punch press. Then I placed the bent plate on top of the plates and pressed the pedal to straighten them. Unfortunately, I heard a clicking sound, which turned out to be the locking cap that normally holds the die in the threads. The locking was so severe that I had to cut the locking cap off the punch press with a Dremel tool to remove it. I would be grateful if you could provide me with a new locking cap or tell me where I can purchase one and its price. I would also appreciate it if you could tell me where I can buy higher-quality dies that are suitable for stainless steel plates. Thank you very much.