Reseñas de clientes para VEVOR CH-60 - Perforadora hidráulica de 31 dientes, perforadora de fuerza, perforadora suave para placas de hierro, barras de cobre, aluminio y acero inoxidable

Amazing time saver. Wish I had this 10 years ago. Multiple dies can be purchased fairly cheaply. Pays for itself the first job.

Wicked little punch for the price. Doing a commercial construction project that I need to hang various lengths of angle iron. Rather than paying for take off and fab cost decided to buy 20' sticks and fab onsite. Punching 1/4" and 3/8" angle iron. So far ~200 holes flawless. I'm about half done. The ch70 and GYB-63D 750w 10k psi Vevor hydraulic pump paired beautifully plug and play and are paid for in the cost of having the iron fab'd by a shop. And I'll have a punch for future. WELL worth the price. Punch a hole in 5-10 seconds vs minutes drilling, I'd probably have spent at least half the cost on drill bits.

will punch a 3/4 hole though 1/4 plate all day long when paired with vevor air hydraulic pump. saves alot of time drilling

Did as advertised outside of the box. Worked first time. Alot of flex when pressing but it's expected.

CH 60, Punches 1/2" 6061 / T65111 aluminum like it's paper. Used a hand pump with 1 hand and punched 5 holes with no real cleanup compared to drilling. Wish I can find resonable priced punches. Seems like the ch70 has better less costly options than the ch 60. Not sure what hydraulic connection they provided, but I swapped to a more common connection to match my Enerpac 10k hand pump.

Couples up really nicely with the air/hydraulic pump, punches a nice clean hole. And surprisingly quick.

I've been drilling holes and finally found the hole punch, wow what a time saver. I've only used it for a dozen holes, so I'm not sure how long it's going to last.

Excellent product, quickly punched 180 holes in 1/8" plate and angle iron. Much better than drilling!

Great value easy to use fast delivery recommend quick delivery Great product good selection of punches

Used this CH-60 punch to cut 3/4" holes in guard rail post with 2510A Air/Hydraulic pump. It does a good job snapping holes in 3/16" steel with a nice loud ring. Neighbors a half mile away asked what that popping noise was. With that said...If you use this unmounted (as holding it on its side punching holes in vertical metal) be prepared to use your muscles. At 38.7 pounds it is a substantial weight to hold in position repeatedly. If it were lighter, It would not work have strength to push a steel punch through another piece of steel. Will have a few hundred plugs before finishing. I can use 3/8" punch to turn them into heavy washers. I'm happy with purchase.