Reseñas de clientes para VEVOR CH-70 - Perforadora hidráulica de 35T, con fuerza de perforación y suave para placas de hierro, barras de cobre, aluminio y acero inoxidable

Great value easy to use fast delivery recommend quick delivery Great product good selection of punches

Used this CH-60 punch to cut 3/4" holes in guard rail post with 2510A Air/Hydraulic pump. It does a good job snapping holes in 3/16" steel with a nice loud ring. Neighbors a half mile away asked what that popping noise was. With that said...If you use this unmounted (as holding it on its side punching holes in vertical metal) be prepared to use your muscles. At 38.7 pounds it is a substantial weight to hold in position repeatedly. If it were lighter, It would not work have strength to push a steel punch through another piece of steel. Will have a few hundred plugs before finishing. I can use 3/8" punch to turn them into heavy washers. I'm happy with purchase.

I punched 1 1/2” hole thru 3/8” a36 flat bar using a hand pump and it worked great! Time will tell but for $119 can’t pass it up!

Excellent communication, fast delivery. Yes, this company is real! For the price, you can NOT go wrong!! It payed for itself with a profit in the first job

This little guy works like a charm. Punched about 1000 holes the first couple of days upon receiving the tool. This tool is worth the money. I’ve used the 3/8” and 3/4” dies on 1/8” flat bar with no problem. Wish I would’ve bought the foot pedal pump. I recommend this punch tool

Good evening: I'm using the CH-70 punch press with dies I bought from AliExpress. I have to say they're quite poor quality; several have already broken, but I can't find them anywhere else to buy. Today I started punching 4mm stainless steel plate, and two 5mm diameter dies broke immediately. The first time, the hole was made, but the second time, not only did it fail to drill, but the die broke and bent the plate. To try and straighten the plate, I removed the die from the punch press, screwed in the punch press's locking mechanism, and placed five 4mm wide plates on the base of the punch press. Then I placed the bent plate on top of the plates and pressed the pedal to straighten them. Unfortunately, I heard a clicking sound, which turned out to be the locking cap that normally holds the die in the threads. The locking was so severe that I had to cut the locking cap off the punch press with a Dremel tool to remove it. I would be grateful if you could provide me with a new locking cap or tell me where I can purchase one and its price. I would also appreciate it if you could tell me where I can buy higher-quality dies that are suitable for stainless steel plates. Thank you very much.

Good tool. Pity Vevor did not sell the punch tooling but nonetheless good tool.

I pushed this thing with a 17/32" square punch. The only way to orient punch is to establish a flat on punch and drill ram for a set screw. The 'snap' of 1/8" A36 has a tendency to loosen the punch retention nut. But, overall. I am pushing the design limits.

It definitely a plus in the shop to punch brackets that we use that are difficult to get at times. Works great for round holes. Everything else is a little difficult to get precisely lined up. Wish they would have a indexing slot at least for the top die which would make it so much easier and useful. If your punching round holes it's absolutely great. I punch 3/16 steel like butter and it's fast.

Ce perforateur hydraulique est performant et très pratique d'utilisation avec la pompe hydraulique vendue sur le site. Les matrices de poinçonnage permettent de percer rapidement l'acier sur des épaisseurs très correctes. De plus les matrices de poinçonnage sont très facilement disponibles sur internet et à des prix très raisonnables.