Reseñas de clientes para Horquillas para palés de tractor VEVOR de 58,7", con capacidad de 4000 lb, para minicargadoras.
No 4000 lbs
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
1114 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Terry Eaton joo Owner
43 pulgadas 2000 lbs
Delivery man was great product good quality good price easy to use haven’t tested them too much yet butthonk they will be great
0 personas encontraron esto útil
Traducir reseña a Español
Linda D Putt Davis Farms
60 pulgadas 4000 lbs
Only had a short time, but seem to work great. Will definitely help with moving tubs for cows. Easy to put on bucket and adjust.
0 personas encontraron esto útil
Traducir reseña a Español
Kirk Rutherford Met my needs
43 pulgadas 2000 lbs
These came in handy when we had material delivered to the farm. They will tend to losen after some use so keep a rubber mallet close by to tighten them back. The brace is great for setting the width, but I found it takes away from the depth when picking up pallets. I'm pleased with them for the occasional use.
0 personas encontraron esto útil
Traducir reseña a Español
Tim C Very Good for the money.
60 pulgadas 2000 libras
Product as described. Functions well on my Deere 1023.
Shipping / tracking was VERY BAD! It took longer than expected to arrive.
0 personas encontraron esto útil
Traducir reseña a Español
Roberto Garcia Mr
60 pulgadas 4000 lbs
So far it seems to be working really good if it keeps working like this, I will raise my score to a 5 all the way across
0 personas encontraron esto útil
Traducir reseña a Español
Jim Derra Mr
60 pulgadas 2000 libras
Compression plates won't stay in allowing forks to move around on the bucket because you can't tighten them up enough. But it works
0 personas encontraron esto útil
Traducir reseña a Español
Joey Can't get the forks tight
43 pulgadas 2000 lbs
I find that the pallet forks would be better if they actually bolted through the bucket. I can't get them tight enough to keep them from moving. I am satisfied with the weight that I can pick up with them
0 personas encontraron esto útil
Traducir reseña a Español
Fred Mr.
Forks great just dont fit my bucket well because of step on bucket. Other than that no problem If bucket was flat would mount great. I just got to build something so they will clamp more securely.
0 personas encontraron esto útil
Traducir reseña a Español
Lee Purchaser
These 4000 lb. pallet forks should have come with a stabilizer bar to limit side to side movement, the same as the smaller forks.
Also, the screw down rods (2 each fork) would be much better with a nut welded to the plate and the rod would then screw down into the nut. As it is the nut is attached to the screw rod, and as soon as the nut reaches the plate, the whole plate slips and slides sideways. This causes paint to be removed from the plate and constant repositioning of the plate while tightening.. This would not happen if the nut were attached to the plate as the rod would hold the nut and plate in place.
0 personas encontraron esto útil
Traducir reseña a Español
Mikell Manager Black River Railroad
43 pulgadas 2000 lbs
They work great for the price. I wouldn't push them too hard but I have lifted over 1000# without an issue. Would buy again for the price.
0 personas encontraron esto útil
Traducir reseña a Español
