Reseñas de clientes para Hincador de postes en T a gasolina VEVOR, motor de 4 tiempos de 37,7 cc, eficiente, con 3 manguitos de hinca y mango antivibración, para cercas de alta resistencia, ideal para granjas, huertos, obras viales y paisajismo.

*CAUTION ADVISED BEFORE USING THIS ITEM* - Tool arrived and was prepped for first use, and while driving the very first pole, only several strikes in, the collar/sleeve completely fell apart. All bolts/fasteners backed out and the assembly immediately began disassembling itself. Re-fastened all hardware, and after a repeated experience (this time making it maybe 3 posts further) applied LocTite to all possible hardware in the collar/sleeve assembly. This was still no match for the design/functionality of this driver, and ultimately the hardware once again falls out after essentially every use. Considering this unit is mechanically identical to several other "brands" out there, this is all likely a result of this cheaply-made post driver being poorly designed, assembled and using subpar components. Spend the extra $ if you have any sort of project-type use (not just driving a single new mailbox post, etc.) and look at purchasing one of the more premium alternatives. Very disappointing - would NOT recommend

Couldn’t drive a 3 5/16 post more than 2” into soft ground. Very disappointed

I have two of them sitting in shop used twice and fell apart went through the whole thing, loctite it all the screws. And still just comes apart

The machine arrived in a damaged box and was broken inside . I emailed them and I'm getting a run around about getting the machine replaced

It worked for three days only..

Didn't fit on a wooden 4x4 as advertised

Way too heavy for my husband to use. They apparently don't do returns. It's still in the box.

Frustrated 😫 with this machine's lack of power, and the vibration keeps loosening most of the cap screws. The hammer mechanism bolts all came loose without much stress on the machine. I was driving a wood post for a fence, and it has been frustrating having to stop frequently to tighten bolts and screws so they don't go flying all over the place.

I purchased to complete a fence job, I can get to start and run, but as soon as it given throttle it dies. I must have tried moving the choke slightly to see if the choke level had any difference, stopped after 30 adjustments. As soon as I would pull the trigger to drive, I’d get one revolution of the piston and then it dies. I spent an hour on the job just trying to get this thing to work until I realized I was wasting too much time and ended up renting one very far from my home just so I could complete the job. I created a return with ve or a week ago and I still have yet to get any communication on getting my refund. I have purchased many tools from vevor but this one was just plain disappointing.

I have bought a lot of equipment from Vevor, but sadly I have to say I was disappointed with post driver. I have used several over the years, but there was one significant issue that I couldn’t get over. The collar that the driver sat on just isn’t long enough. I was trying to drive 6.5’ t-posts and the head of each post bottomed out about a 1/2” in which causes the heavy machine to be very unstable making it difficult to drive the t-posts in straight or even support it. It was literally more exhausting trying to support it than just using a manual post driver. The quality was decent and maybe a round 4x4 post might be better since it has a large flat head to rest on. It comes with different size collars to support different types of posts, so I am going to try using a larger collar with a piece of steel tube the t-post can sit in to give it more stability.