Reseñas de clientes para Juego de conductos para calentador diésel VEVOR, manguera de aire extensible de 7,6 cm, tubo de escape de acero inoxidable de 2,5 cm, 2 salidas de aire, conector de salida de aire en T y abrazaderas para manguera, para calentadores de estacionamiento diésel de 2 kW, 5 kW y 8 kW.

Awesome heater. Super easy to install. Works great in our pop top camper

It works, a Y junction instead of a T piece would have be the smarter option. Creating the same distance so same volume of air flow to both sides. Also would allow for greater length of pipe as 1 isnt going side ways. The extra hose clamps (19mm - 24mm) or whatever they are supposed to be are helpful if u receive this at the same time as the heater. As some that were supplied with my heater were unusable due to a stripped worm drive. So this allowed me to continue my setup without having to dash down to Bunnings or Supercheap for more clamps. The extra exhaust pipe is a very handy option, i do wish that id ordered a longer bit. As u can always cut it down it its too long.

Preiswert. Nur zur Reserve gekauft.

Looks the part bought as a spare

Brought this as a spare for future use. Consider purchasing a spare fuel pump. I like that it was supplied with special fitting tool.

A great kit, especially the heat ducting extension to add to my Vevor 8kw heater (unfortunately the exhaust is a little too short, No dramas, I just ordered a longer one) This one is set up as a workshop heater so the extra ducting was needed.

Good product and it does exactly what what it says it does. When I ordered this I figured the black vent tubes were closer to the originals that came with the diesel heater. These vent tubes do not expand nearly as far as the originals The ridges are smaller and more rigid, made solely out of aluminum. This is the reason I only gave it four stars. They won't serve my specific need but it is a good product and I do recommend them

The new ones have flappers so you can direct heat. This works as it should. No problems

A nice addition to the heater kit but be warned, it has ducting that is 100mm diameter. The heater is 75mm outlet. No reducer fitting supplied. The extra exhaust pipe is correct size & is very handy.

I figured this would be priceless to have on hand in freezing temps. Building a small repair kit to keep with my heater. Fast shipping! Will be five stars if it gets me through a failure.