Reseñas de clientes para Juego de machos y terrajas VEVOR, 110 piezas, incluye tamaños métricos M2 a M18, machos y terrajas de acero para cojinetes, herramienta esencial para cortar roscas internas y externas, con accesorios completos y estuche de almacenamiento.

Looks to be good quality and price was good. I haven’t used yet is the reason for the stars

The quality of the taps looks good, and now I have taps for almost any threads! The quality of the plastic case is actually pretty bad. The locks is not tight, so I would not trust them. There were also one taps loose inside the case when I opened it. It cannot click back on its case. Would rather pay some more for better quality on the case.

Pros: Many sizes from very small to large with many pitch and TPI. Perfect to make new threads on soft metals like Aluminum, Copper Brass etc... Useful to use as thread chaser or thread cleaner. Cons: The Dies and Taps made of soft metal and cannot make new threads on steel. Some Dies and Taps need to be deburred before used. Some Dies and Taps are missing and populated by double already included.

J'aurais aimé trouver un coffret avec beaucoup plus de tarauds en pouce. Celui-ci couvre la majorité des pas courants mais plus de choix sur les pas fins aurait été plus intéressant

Very handy set of tools.Tap and dye. Good quality. Good set for its price. The company has good aftersales communication and response when you experience quality issues. Highly recommended.

The few taps and dies I have used have preformed as expected. They seem to be of good quality steel and have cut good threads. The adjustable tap wrenches feel cheap and the threads are very loose. The included screw extractor set is a nice addition but I found the largest extractor wasn't hardened as it deformed when trying to remove a burr in a nut. Using a hand file it cut right into it. I bought the set to have all the sizes organized in one case but I found each time I opened it everything was all jumbled together. 6 of the taps always fell out so I used silicone tape to give them a tighter fit in their slots. The die set was packaged in bubble wrap in a box and I cut the bubble wrap using the case as a template. This placed over the dies when the case is closed keeps them in their respected positions. Now it can be opened and everything is where it belongs. As I have only used maybe 6 of the taps and 2 of the dies I've had limited use and time will tell if the rest are of good quality.

Rapport qualité prix correcte. Très bien pour rattraper des filetages endommagés ou fraichement repeints.

Oh man. So, I guess I can preface this by saying that I do own a machine shop. I bought this for home use. Quite a few of these taps will destroy a hole more than fix it. I *have* encountered a usable tool in this kit, but it is very much a grab bag of good and bad... Realistically, if a person was planning ahead, you would be better off buying one of each size bolt, slitting it off center with a dremel, and putting them in a box. That would be more reliable and do a more consistent, better job... Unfortunately, if you are buying quality taps and dies, this price would only buy two-ish smaller, or one of the larger pieces... but, it IS incredibly frustrating when you need to tap a 6mm hole, you have three "new" taps, and none of them will do the job...

Prisvärd pra produkt

Produit acheté récemment, qualité très moyenne! Ne correspond pas à mon attente. On n'en pour son argent pas plus.