Reseñas de clientes para VEVOR Kit de dirección hidráulica fueraborda 150 HP Sistema de dirección hidráulica marina cilindro de bloqueo bidireccional manguera de 26 pies para barcos de un solo motor de una sola estación

Muy fácil de montar, encaja perfectamente en mi tohatsu de 90cv 2tiempos, como pone en las características, cambio radical en comodidad y precisión....a falta de ver la venera del producto muy, muy recomendable

Mycket bra.

Super livraison rapide matériel apparemment de bonne qualité bien emballer qu'elles huile préconisé vous merci

Had this installed about a year. works great and loving the instant response to steering and you could steer with one finger if you wanted to. It was easy to install just a bit tricky to bleed but i got that sorted, that's not a fault of the unit. One of the fittings on the back of the pump unit was stripped so I couldn't fit it, rather than wait I just took it to a local hydraulic shop and got a new fitting. still waiting since last year for the vevor replacement fitting. no drama all working.

Great product, great price. Instructions suck, but plenty of videos on YouTube. Took a little longer to install, but that was me being careful. I have recommended this product to two of my friends, offered to help them install, to convince them to upgrade their boat steering with this product.

Easy to fit. Suggest getting a longer clear tube to connect the 2 bleed lines together, open both, fill the steering unit with fluid. Turn the steering wheel in one direction very slowly, stopping every few seconds to let the air out and new fluid in. You should see the fluid going through the tube. Continue until all the fluid is in. Then turn in the opposite direction and check for air bubbles. Once all gone, close the bleeds and remove the tube. Can all be done by yourself.

Great priced item for small to mid sized boats. It makes steering and trailering much easier.

Je recommande

I received it within a few days. The instructions are very good, and the product is even better.

My old cable steering broke. I bought this system for the 90hp Evinrude E-tec. It’s an amazing upgrade. I did have to drill the hole out some more to line up with the steering arm on the outboard, but not a big deal.