Reseñas de clientes para Kit de plantilla para agujeros de bolsillo VEVOR, ajustable de 1/2 a 1-1/2 pulgadas, con maletín de herramientas, abrazadera en C, taladro escalonado, llave hexagonal, tope de taladro, broca cuadrada y marco de metal reforzado para carpintería.

Zunächst etwas gewöhnungsbedürftig - dies dürfte sich mit der Zeit und mit mehr Übung allerdings geben.

I love this tool and beats the pants off the Kreg Jig by far with not only the price but quality and operation. Good job guys.

Clunky and some of the attachments didn't fit properly

El usuario no dejó ningún comentario escrito.

Het product is in de tekst in mm aangeduid, echter staan er op het product geen mm maar inch dit wordt in Europa niet gebruikt.

Primer uso y se atascó

I originally wanted to get a metal pocket hole jig for durality. However, I've used it only a few times and the drill bit consistently shaves off metal from the jig. There's enough play in the jig now that there is no way to consistently drill holes. I can't recommend another brand enough, just pay a higher price and you won't have to replace it in a few uses.

Love this jig but haven't had long . Was doing a slat wall pre drilled all my holes started putting up and realized all the heads of my screws stick out. Got to looking and the holes are wallered out. Jig is useless now . So is my project

The jig does not hold position tightly enough. Even when screwing it into place very tight the drilling process would often move the jig leading to me drilling into the metal bottom plate a little ways.

Too much plastic and very cheaply made. Will not last too long if used repeatedly. The sizes it grips is limited.