Reseñas de clientes para Lijadora de banda VEVOR, pulidora de banda de 72 x 2 pulgadas con velocidad variable y VFD, pulidora de 1500 W y 2 HP con 3 moldes de pulido y 3 bandas de lijado para metalurgia y fabricación de cuchillos.

Fonctionne si bien que j'ai repoussé la rédaction de cet avis de quelques mois. Je l'utilise presque tous les jours depuis 4 mois et tout va bien. Je suis coutelier et le changement de vitesse est nécessaire pour ne pas brûler l'acier trempé. Si vous êtes coutelier et indécis, ne le faites pas.

Super produit livraison suivi très efficace produit au top très costaud je teste plus en profondeur à très vite

Reçu en seulement 4 jours, matériel de très bonne qualité surtout pour le prix ! Je suis très satisfait.

Après 15 jours d'utilisation je suis pleinement satisfait de mon achat. Produit top qualité robuste et de bonne facture, avec son moteur de 2cv rien de lui résiste je conseille ce produit pour tous bon coutelier amateur

Parfait,très bien emballé.

I received the grinder in a nice wooden box, however, the bolts used to secure it to the box frame broke off and the arm arrived sticking through the side. It did not look damaged. The wiring was not secured to the fitting, so the siring into the VFD pulled out. I solder the wire back into the blade housing and plugged it in. The issue I discovered was the main arm and the channel it fits into are an 1/8-3/16 out. I have aluminum shims on one side and top of the steel square stock and now it fits snug into the channel. Other than that, it seems to be worth the money when compared with other non-Chinese products and cost.

I purchased the Vevor 2x72 belt grinder for blacksmithing and knife making. I have put it through the paces and it has held up. The only issue is there is no instructions on how to use the VFD. Finding any information on the internet has not been successful. That is really my only complaint. All in all it is a good belt grinder. The price point was right in my wheel house and set up was a breeze.

Funciona muy bien, hace lo que debe hacer y lo hace bien.

Great unit at great price. A lot for the money. Seems to work very nicely so far. Would have appreciated a tool arm receiver, or at leat an option for it.

The manual for the control box is very difficult to understand. The grinder is very well built. Everything tracks perfectly. Belts are super easy to change. When I got everything set up and plugged in, I would turn it on only to get an Err13 code. I researched the internet, with no luck. I took a close look at the controller and found a wire had come out of its end connection. There was only around 1/8th of an inch stripped and crimped. As I was removing the cable in order to put a better end on the circuit me wire, another wire came out of its crimped end as well. Same thing, only 1/8th of an inch stripped and crimped. So, I fixed them both, put it back together and it runs perfectly.