Reseñas de clientes para Lijadora orbital aleatoria VEVOR de 6 pulgadas, 400 W, sin escobillas, 7 velocidades (4000-10000 RPM), incluye 10 lijas, bolsa para polvo y manguera de aspiración para lijado y detalles en carpintería.

My most expensive sander. Bought it for the less vibration. It still has vibration, but nut as bad as my old one. The vac port and detachable power cord are very nice upgrade from what I had.

I have been very happy with this sander. No issues. Other than having a cord, it is great. I really like having the 5" and 6"options. I am using the 5" right now till I use up all my 5"sandpaper. I would give it a 5 if it was cordless. :-)

Leistungsstarkes und robustes Gerät. Etwas schwer vom Gewicht her.

The sander was a very good buy, it arrived accurately and quickly as promised. The grip of the equipment is very good, soft, comfortable to work with. Could probably be a little quieter, but this may not cause a problem with ear protection. The dust extraction is very good, the body of the machine fits well in the hand. Unfortunately, after the first 6-8 hours of use the abrasive disc came loose, I had to disassemble the moving part of the machine. Tightening the loose screw is difficult because it is attached to the motor shaft, which in turn rotates freely. So, I will have to disassemble the whole machine to tighten the loose main screw. We'll see the result...

Very nice sander. Outperforms any other sander I have owned. The 5”pad that the sandpaper attaches to isn’t real sticky. It’s like the little nibs aren’t long enough. It works but I would like to purchase a replacement and use a cushioned pad but can’t find a replacement. I have asked VEVOR for a part number but they couldn’t help me. I would order another sander but they have been out of stock for months.

Order was shipped and delivered very fast. Received order within the displayed time. Now to the sander. Positives first, light weigth, compact and comfortable to use, very low vibrations compared to my makita sander, the hose that comes with sander fits inside my festool midi hose so no adaptors needed, well balanced so easy to edge sand boards, long flexible power cord. Now the only negatives i have so far are that a euro to british style plug adaptor is needed if in ireland or the uk. And the dust extraction is not the best, its ok if sanding flat boards but sanding edges or above your head there is a decent amount of dust left. So far with this sander im very happy. Time will tell if it lasts or not. But so far, for the money it is a bargain. And buy some pad savers and 3m cubitron sand paper it works great.

I’m happy with my purchase. I have used it several times and appreciate the results of the sander. It does not bog down under normal use. The grip seemed awkward at first. I thought it didn’t provide enough room to hold it. Experimented with a few different methods of holding it and found a comfortable way to hold it and have good control of the sander.

Eigentlich sehr guter Exzenterschleifer (betrifft 400 W Ausführung). Leise, kaum Vibration, sehr leicht, super Abtrag. Aber die Absaugung war sehr schlecht, nach 20 Minuten war mein Arbeitszimmer komplett im Staub. Habe es zurück geschickt.

It sands well, but the dust collection doesn’t work at all, even with the vacuum connected.

La máquina funciona muy bien, especialmente cuando es nueva. Si vienes de una lijadora con motor convencional, el motor brushless se nota muchísimo: hace que la máquina sea más ligera, más silenciosa y más ergonómica, y trabajar con ella resulta muy cómodo. El problema aparece con el uso prolongado. Yo la utilizo mucho y el velcro del plato, donde se adhieren las lijas, se desgasta demasiado rápido. Tengo dos máquinas de este modelo y a las dos les ha pasado exactamente lo mismo. Una solución muy sencilla sería poder comprar platos de repuesto y cambiarlos cada cierto tiempo. Si VEVOR ofreciera pads de repuesto, para mí no sería un problema: podría comprar uno nuevo cada uno o dos meses y seguir trabajando con la máquina sin mayor inconveniente. El problema es que VEVOR no ofrece estos repuestos y, además, resulta bastante difícil encontrar pads compatibles de buena calidad. En mi caso, el desgaste ha llegado a tal punto que las lijas ya solo se sujetan bien cuando la máquina está apoyada sobre la superficie que estoy lijando. Si intento trabajar en superficies verticales o en otros ángulos, los discos se despegan y salen disparados. Es una pena, porque la máquina en sí funciona realmente bien y el motor brushless es fantástico. Para uso ocasional la recomendaría sin dudarlo, pero si la vas a utilizar mucho o de forma profesional, tendría en cuenta este problema. Con la posibilidad de comprar platos de repuesto, sería una máquina mucho más interesante.