Reseñas de clientes para Manguera de PVC Flexible de 7,6 M para Ventilador de Escape de Diámetro 203 mm

the 8" x 25' flex duct is about 8# weight, arrived compressed to 6" long and 9.13 od, stretches out easily on floor to 20', will hold 22' length if stretched, must be stretched to get to 24.5'. The inlet end has a tie on 32.5" circumference so will fit over a 10.3" end, other end has internal 8" OD ring that may fit snugly into an 8" hole. The 5 supports are about 6' on center. When hung on 6' centers the center sections deflect about 2" which looks fine, the end sections sag 3 to 7". Putting a strap under the flex duct in an "X" btwn supports flattens out the center sections, but the ends still sag noticeably. I made a cradle of 1/2" EMT with 1/2" PVC tees joined with a 1/2" PVC 45 ell and that makes the duct very straight when suspended from above.

The exit is 8 inch diameter but the sinch end input could likely fit over a larger tube, maybe over a 12". The included rope was long enough to go around again on an 8" air scrubber output to take care of the extra material. There are hooks about every 5 ft at the tubing's natural hang (that is if you hold one of the hooks at 5ft, the next hooks are near the floor). Not sure how I'm going to pack it up to put it away.

Works very well good quality well built works great for my paint booth! Awesome for inflatable paint booths!

Got this to use with the inline duct fan to do air circulation or hot air exhaust in my off grid house, tested it but haven't actually mounted it. Seems that it will work fine though.

The ducting hose is heavy and high-quality. It was perfect for use with the VEVOR air scrubber. Recommended.

I was impressed with the durability of this duct hose--the material is strong and heavy and supported by sturdy rings. The attached clips made it easy to install using hooks without the use of any other supporting hardware.

I use this in place of an old vinyl plastic expandable tube. This works much better, as it has an opening with a rope to tie the opening around pipe, or in my case a ventilator fan that is 8" in diameter. I use this to vent welding fumes out of my garage. Its durable, and has D rings attached if you want to mount or hang it. Its easy to collapse when not in use. For the price, its durability in comparison to other options I looked for, it works great and has good value.

Nice extension, hokey how you have to hook it all up, but it’s easy to make your own coupling for a better seal.

Tres bonne qualité a un excellent prix. Je l'ai utilisé pour une aitre application mais le produit est parfait

Top Produkt ist weiter zuempfelen. Leitet die warme Luftmenge weiter und dem Schlauch kann man aufhängen an den Ringen