Reseñas de clientes para Peladora de cables automática VEVOR, pelacables motorizada eléctrica de 0,06''-1,57'', 750 W, 30 m/min con referencia de profundidad de pelado visible, 10 canales para reciclaje de chatarra de cobre

Le moteur ne fonctionne pas et le service méditer remboursé

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

0.05” wire (16 ga) wire it claims to do,.. witch is why I choose this single wheel model. And let me tell you personally it does not work

This product worked out of the box then within about 1 minutes started making a grinding sound in the gears. Contacted customer support which is a absolute nightmare of a process and extremely time consuming! Took approximately 2 weeks of back and forth emails with days of zero reply or care from Vevor. The END RESULT WAS A $95.00 DOLLAR CREDIT BACK ON A NON WORKING MACHINE THAT RAN LESS THEN 1 MINUTES WITH VIDEO AND SOUND PROOF THAT IT WAS NOT WORKING PROPERLY! So on a $209.00 dollar machine that Vevor says was not in working in order from the beging Their answer was give less then half back to the customer. So purchase at your own risk and be ready for them to do nothing if its not in working order when it gets to you.

Waardeloze machine! Massieve koper kabels draait ie om het tandwiel heen, of schieten de motor in. Dunne normale koper kabels schieten steeds onder het mes weg! Mijn schoonzoon heeft de duurdere versie en die is vele malen beter! Die doet zijn werk l. Deze machine bezorgd he alleen maar extra werk! Motor word kokend heet na 5 minuten aan staan Ik raad deze machine zeer zeker af!!!

The blades and gears are not aligned properly and have been a pain to try and realign. After stripping a about 2500' of #10 it has gotten worse. I owned the previous model a few years ago and had much better results with it.

Bonjour, j'ai reçu ma commande aujourd'hui mais la molette en plastique de réglage est cassée... Je suis un peu déçu. Merci de me faire parvenir une pièce de remplacement. Cordialement.

Nice product, does larger wire well but the smaller gauge not so well!!! Smaller gauge wire tends to wrap around roller then there is time wasted getting it off the roller. Larger wire works well !

Purtroppo non mi soddisfa

Over Priced Time Saving, yet Time Consuming