Reseñas de clientes para VEVOR Máquina Automática de Pelado de Cables 370 W 1,5 - 38 mm Máquina Peladora de Cables con 11 Canales y 10 Cuchillas 15 m/min Pelacables Eléctricos de Metal con Mango Ajustable Estructura Metálica

Awesome machine!!!! Works great

This thing is a beast. I stripped about 8000' of wire over the last few days, from 14 Guage to 3/0. 1000' of it was 3/0 wire that was 100' long per 3/0 strand. I laid the wire out straight with the machine on the ground and it pulled the 100' runs of 3/0 through with no problems. This saved me so much time. There is a learning curve for getting the blades and tension set right so that it cuts through the sheathing, but doesn't cut into the wire. This is especially important on small stranded wire. If it is to tight it will cut the stranded wire into pieces and when you try to rip the sheathing off, you will run into very very sharp cut peices of wire and they hurt. So yeah, learning curve. I would suggest separating your wire by size and set it up and cut all of the same size wire, before jumping to the next size wire, that way you don't have to keep adjusting it so much. There is of course some room for improvement with the machine, just like with anything else. But all in all, this thing is awesome. When I got the machine, the turn wheel to be able to spin it manually was the wrong size and wouldn't fit. So I contacted them and they sent out the correct part immediately. They were very responsive when I contacted them and even followed up with me to check on things. This was the first thing I had ordered from Vevor and so far, the experience has been great. I just ordered some stuff for a job I'm doing and plan on using these guys a lot more. Thanks

This thing is a beast. Ran 1000 feet of coax through it never even got warm.

Great we are happy with nice quit easy to use

This stripper is awesome. For the money, u can't beat it. It looks great it works great. I have used on all sizes of wire & it works great on them all.

Amazing product would recommend to everyone I have owned this product for over two years now and it has been working every time I use it flawlessly

Works great. Stripped 200' of 600 mcm first day with no problems! Paid for itself within the first use.

We have already stripped out 80 lbs of copper thus far which in turn paid for this machine. So any other wires we strip will be free money in our pockets. I do suggest you make small adjustments at a time to get the perfect cut. It just takes a little bit of practice and you’ll be glad you got this machine. Definitely beats doing it by hand 100%! Thanks VEVOR we can’t wait to order the diesel heater and other items in our wishlist.

Awesome machine!!! Strips wire like an animal lol Would definitely recommend this product to anyone looking to process a lot of wire

Works as it should, haven’t had any major issues. Not as heavy duty as I would like, but very well built for the price point.