Reseñas de clientes para Portaescaleras para camión VEVOR, 125-185 cm de ancho, extensible, universal, de acero resistente con capacidad de carga estática de 362 kg, ideal para canoas, tablas de surf, escaleras, madera, tiendas de campaña y cargas grandes.

Was easy to install Haven't used it yet. Kinda cool it came with all the bolts you needed to faster it down

Good Prices & Quality Products !

Great rack all around, 0 problems, strong and does the job

This ladder rack is very well constructed. Larger tubing than I expected. Welding is good, paint is good. Easy to assemble. Hardest part is drilling holes in truck bed rails. Installed it on a 2012 Nissan Frontier. Bill.

This is a nice strong rack. The instructions could use a little work. I installed on our 2007 Chevy Silverado 2500 Classic. Fit like a charm. To help others installing, here are two pictures of the plate. First there is a rubber pad, then install 3 T-Bolts, aligning middle with position based on the bracket, then place bracket over the T-Bolts, and clamp in with the clamps to the side of bed. Bolts are stainless. Won't rust, but also aren't strong, so be careful not to over-tighten. No warning front stainless bolts, they simply snap. Hope this saves others 1/2 hours of pondering how the plates assemble. I used clamps, one other option is to drill through holes and bolt to top of bed. Another option exists if have a cover - have no idea on that method.

I like this rack. It is very sturdy. I like the aluminum frame and, it appears all the hardware is stainless steel which surprised me. I Was actually planning on replacing the hardware with stainless steel if it came with basic metal screws. I was able to put this on my truck even with the Retrax bed cover. To do this I had to extend the side rails all the way out and drill through the truck bed rails to install it. This rack does have three bolt locations for each of the four corners, for a total of 12 bolts to hold it to the truck. I thought that was overkill and only put one bolt in each corner.

Highly recommended from price to quality. This is a good deal. Setup 23 Tacoma SR5 v6 Synetic pro with rail

Great product and a good bargain! Great for a Ford Maverick. The mounting hardware almost seems designed specifically for Ford trucks. Directions were a bit hard to follow at first, but made sense once review a bit. The rack looks very good too (or at least I think so!)

Like all Vevor products, it arrived quickly and well packaged. The hardware in the kit was great, instructions were pretty good, but don't really show where any of the washers are supposed to be used. Installation was more time consuming than expected, and getting the bolts to defy gravity took some ingenuity that isn't portrayed in the instructions. Might have been easier to just drill through the bed rail and mount than using the clamps, but I'm not sure since I used the clamps method. One of the crossbars was not like the other, it didn't have the rectangular hole in the channel as the other, and the hole for the endcap screw was farther in from the end...and the endcap won't slide on that far for it to work. Don't know if that bar is from a previous version, or just didn't get completely machined before it was sent over to receive coating. Overall though, I'm happy with the result. It is a nice looking and very useful rack, and I'm glad I bought it here instead of some other site with similar racks.

Rack is very easy to assemble and set up on truck. Seems to be working great. Had to do some minor modifications to fit my truck but that was more for cosmetics than function. Excellent price. Only down side is is not quickly adjustable to raise or lower but still a great deal. Would definitely recommend.