Reseñas de clientes para Prensa de taladro magnético MD50 de 2" de perforación y fuerza de imán de 2900 libras

Good design. Says “50H” on mine. Runs at 120V/60Hz. Measured 670 RPM no load. Gear ratio: 25.06:1. Zero internal electronics (no soft start circuit) or SCR speed dimmer - WYSIWYG. Power was properly grounded to the body. I like that the carbon brushes are easy to access. The internal fuse wire was a bit exposed but easy to fix. It’s a super simple drill with decent gearing. Use with a VFD instead of getting a speed-variable one if you understand how universal AC motors slow down and keep torque.

I bought this thing almost 4 years ago, works like a champ. I have only two issues with it, neither that would make me not but it again, but, the lubrication method for the head and the spring loaded pin for slug removal isn't much and causes a huge mess with excessive oil consumption and then there's the noise the motor makes. I suggest wearing earplugs, I certainly do. Other than that, I use mine all the time from overhead to horizontal without any issue. I would definitely buy it again for the price I paid. It's paid for itself a long time ago.

Fantastic tool for the price. It is easy to use and drills hundreds of holes with out trouble.

Excellent Drill

Works good, using mostly for powering a boring machine I built. Using for 1.5 inch boring bar

This mag drill was my best tool purchase in 2024! I drilled 300 5/8” holes in a 1/2” thick welding fab table. The annular cutters I purchased not so great. The 5/8” cutter broke after 10 holes. Cleveland Steel Tool Company sells incredible annular cutters. Mag Drill: yes Annular cutters: not recommended

Product is definitely worth the money . Has done all I have ask ot the mag drill. For casual use it has worked so for.

Comparable to big name brands, drills true with no run out. Magnet works well, the add-cool tank is a little cheap but does its job.

I recently purchased the MD50 mag drill for a project that was going to require a great number of 5/8" holes and larger that was giving me spasms just thinking of doing it with a hand drill, let alone maintaining any precision. This machine is fantastic! It doesn't have all the fancy electronics, just the power and required switches to energize the mag and get the job done. Thanks Vevor.

Llego en tiempo y forma, la calidad es buena ahora falta probarlo, el imán es excelente y para trabajarlo es muy sencillo