Reseñas de clientes para Prensa hidráulica VEVOR para taller, prensa hidráulica de bastidor en H de 12 toneladas para garaje/taller, prensa ajustable con placas de presión, prensa hidráulica de alta resistencia para garaje, taller o taller.

Not as heavy duty as I'd like, but will press my light duty stuff. Would be afraid to do anything larger on it.

The press was rather easy to assemble. The only drawback is it takes 2 people to install the jack. The 2 other drawbacks is the table part needs a sleeve between the bolts If you tighten them you can't move the table without loosing the bolts. I just cut a couple pieces of round tube and made sleeves. The other drawback is the press plates. Unlike the plates on the harbor freight plates which are 1 inch thick and have different notches on all 4 sides this press has just 2 thin flat plates. Making it difficult to press different types of bearings etc. Other than that it's worth the money.

Ok, not the best but it was cheap and will work in a pinch.

J'ai acheté cette presse 12 tonnes pour changer les roulements d'une Mégane 3. Il s'avère que 12 tonnes c'est vraiment limite. Les traverses ont été marqué dès la première utilisation, voir photos. Le montage est facile et ne prend que 10 à 15 minutes. On regrettera le fait de ne pas avoir de jauge de pression d'huile. Et l'espace entre les deux traverses est trop petit pour faire sortir des roulements. Cela oblige à faire des montages plutôt archaïques.

Nit bad for cost

Nice little H Frame. Only complaint is the adjustable crossbar will bend/flex when you use it. Figured it wouldn’t if you kept at what it’s supposed to be rated for but it definitely does. Hopefully it’s not a long term issue that will require replacing. I’ve only used it once.

Unit arrived in a very well packaged box, upon opening and inventorying all the parts I could find no hardware and the press bench was not there (missing parts). I was not going to review this but decided this is the perfect example of why I should review this company. I notified them of the missing items immediately and they had to go through their process . Well its been over twenty days and all I have gotten is an email every 3 days with absolutely no information other than we are still here working and will notify you when we have a resolution! Just send the missing parts, All of this Iron is nothing but a boat anchor, I need a Press!! Stop sending emails and start sending the missing parts..

Item arrived with oil out of the 12 ton jack all in the card board box. Trying to return an cut and paste the order number. Says it is incorrect. Left with oil soaked cardboard and no easy way to file for return

Directions are non existent good luck figuring how to put together 99 different bolts all M 4.8 I have parts that are not even in picture please do not buy from this company

Very bad one