Reseñas de clientes para Prensa hidráulica VEVOR para taller, prensa hidráulica de bastidor en H de 12 toneladas para garaje/taller, prensa ajustable con placas de presión, prensa hidráulica de alta resistencia para garaje, taller o taller.
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
346 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Service
A bit difficult to square up. Use it to laminate various hardwoods plies for turning stock.
0 personas encontraron esto útil
Traducir reseña a Español
press
overall it does the job. it is not balanced, the holes for the legs leave it side ways, if you can correct that so its leveled you will be solid.
0 personas encontraron esto útil
Traducir reseña a Español
Mr
Man får det man betalar för men den gör sitt jobb.
Kunde varit bättre infästning för själva hydrauliska kolven.
0 personas encontraron esto útil
Traducir reseña a Español
BATTEUX POISSONNERIE
Bonjour J'ai Besoin de ma facture SVP merci d'avance Bien cordialement POISSONNERIE BATTEUX [email protected]
0 personas encontraron esto útil
Traducir reseña a Español
Service
Not as heavy duty as I'd like, but will press my light duty stuff. Would be afraid to do anything larger on it.
0 personas encontraron esto útil
Traducir reseña a Español
Owner of Denny's Customs
The press was rather easy to assemble. The only drawback is it takes 2 people to install the jack. The 2 other drawbacks is the table part needs a sleeve between the bolts If you tighten them you can't move the table without loosing the bolts. I just cut a couple pieces of round tube and made sleeves. The other drawback is the press plates. Unlike the plates on the harbor freight plates which are 1 inch thick and have different notches on all 4 sides this press has just 2 thin flat plates. Making it difficult to press different types of bearings etc. Other than that it's worth the money.
1 personas encontraron esto útil
Traducir reseña a Español
Bom
Equipamento com Ótimo custo benefício funciona muito bem estou bem satisfeito com a compra desta ferramenta
1 personas encontraron esto útil
Traducir reseña a Español
6T prässi
Hyvän oloinen kampe pieniä korjauksia huomioon ottaen
Osa hitsaus saumat hitsattu ohi liitoskohdasta ja pullotunkin öljyt vuotanut pahvilaatikkoon joutui täyttämään
5 personas encontraron esto útil
Traducir reseña a Español
Fais le job
Fais le job, mais, a tendance à se tendre lors de pression à la limite de son domaine d’utilisation.
Dès qu’il commence à se tordre, il faut souder des renforts car il est définitivement fragilisé.
Cependant très bon matériel pour le prix
1 personas encontraron esto útil
Traducir reseña a Español
Très bien
Petite presse facile à monter Je trouve franchement léger la qualité de la boulonnerie livré avec. Mettre du boulon en 4.8 ça fait léger de plus aucun écrou nylstop. Bref prévoir du loctite. Sinon fait le taff a condition de ne pas forcer comme une brute
0 personas encontraron esto útil