Reseñas de clientes para VEVOR 12U Rack de servidor de marco abierto, profundidad ajustable de 23 a 40 pulgadas, rack de servidor de red independiente o de montaje en pared, rack AV de 4 postes con ruedas, admite todos sus equipos de TI de red, equipo AV, enrutador, módem

The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

I ordered my server rack and it arrived quickly. It definitely could've been packed a little bit better as there was some paint that had scraped off of it from rough shipping. But I cant blame that all on vevor, the shipping company definitely didnt treat the package nicely. Overall the rack is great quality and I would buy again.

Great quality, heavy duty I love the castor on the bottom that makes it mobile. The only downside is that assembly is laborious with lots of pieces and screws.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

I was struggling to find something that wasn't $300+ to house all my new networking equipment. This looked perfect for what I wanted to do. Only 4 stars simply due to the screws and hardware not fitting perfectly and some of the assembly needed a little more elbow grease than anticipated, but for the price cannot complain at all. Put this together and had everything mounted properly in an evening. Definitely recommend if you are looking for an inexpensive setup for your precious equipment.

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.

The rack went together fine. The only issue is the shelves supplied are attached only on the front of the rack. Anything heavy causes the larger shelf to deform. It was intended to use as a 48V 100ah battery rack and is big enough but the shelf is unsupported at the back so it will have to be modified. The second shelf is very weak and of no use . Someone mentioned that possibly you could the unit taller instead of longer but that’s not really possible unless you do not plan on using the caster’s. Although rated for 500 lbs on the wheels the one shelf cannot hold 100lbs so unless you’re putting something on the top of the unit that rating is meaningless.

Rack arrived quite fast and packaging was in good condition. Only problem was that assembly instructions were missing. Anyway, rack is quite easy to assemble, so instructions are not necessary. Also those can be downloaded from product page. About rack itself. Paint job is not best. There is scratched and other flaws in paint. Also paint is quite thin, so it scratches quite easily. Also, top cover does not cover whole rack when depth is increased. Top panel cover whole top only when rack is not expanded at all. Most problematic is that rack is little flimsy. Product page says that you can load up to 500lbs (226kg) of stuff to the rack.I have loaded some 120 kilograms of equipment to the rack, and wheel mountings are starting to bend. Also when moving rack around, it feels like it is going to collapse. I do not have needs to move it around. It might be that i remove wheels and keep it stationary. Conclusion is that rack is quite nice for it's price.

Etwas scharkantig und die Metallteile sind minimal verbogen gewesen. Für den Preis aber voll in Ordnung.