Reseñas de clientes para VEVOR 20U Rack de servidor de marco abierto, profundidad ajustable de 23 a 40 pulgadas, rack de servidor de red independiente o de montaje en pared, rack AV de 4 postes con ruedas, admite todos sus equipos de TI de red, equipo AV, enrutador, módem

I was struggling to find something that wasn't $300+ to house all my new networking equipment. This looked perfect for what I wanted to do. Only 4 stars simply due to the screws and hardware not fitting perfectly and some of the assembly needed a little more elbow grease than anticipated, but for the price cannot complain at all. Put this together and had everything mounted properly in an evening. Definitely recommend if you are looking for an inexpensive setup for your precious equipment.

Einfacher Aufbau. Die Qualität ist annehmbar, jedoch war eins der Bohrungen versetzt, weswegen ich selbst ein Loch nachbohren musste.

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.

The rack went together fine. The only issue is the shelves supplied are attached only on the front of the rack. Anything heavy causes the larger shelf to deform. It was intended to use as a 48V 100ah battery rack and is big enough but the shelf is unsupported at the back so it will have to be modified. The second shelf is very weak and of no use . Someone mentioned that possibly you could the unit taller instead of longer but that’s not really possible unless you do not plan on using the caster’s. Although rated for 500 lbs on the wheels the one shelf cannot hold 100lbs so unless you’re putting something on the top of the unit that rating is meaningless.

Etwas scharkantig und die Metallteile sind minimal verbogen gewesen. Für den Preis aber voll in Ordnung.

Buenas tardes, Necesito factura con nuestros datos fiscales de este pedido: CABLEALIA INFRAESTRUCTURAS, S.L. CIF.: B98773989 Dirección: Avda. Cataluña, 9 Entlo 46020 VALENCIA VALENCIA Enviar a [email protected] Gracias

Hay que hacer bastante fuerza para que los tornillos hagan las roscas, por lo demas queda muy robusto. Las bandejas podrian ser un poco más gruesas pero lo que es el rack si que queda muy robusto

Super rack fiable et assez rigide pour mon imprimante 3d. Les trous des vis sont malheureusement trop petit et doivent être agrandis . A part ça tout est bon.

Rack pour serveur a très bon prix. Petit problème, le montage. Car faire un montage avec des vis auto perfo ce n'est pas tip top. Ce n'est pas gênant, mais si besoin démontage remontage du rack ça peut le devenir. Sinon très solide rien à dire.

The VEVOR 12U Open Frame Server Rack, is a nice equipment rack, and seemingly serves its purpose. Putting the rack together, on the other hand, may also seem a bit of a challenge to some who are not so mechanically inclined. The directions are not all that informative - thankfully there are a few illustrations which give guidance to complete the assembly. The bulk package of screws which are necessary to construct the rack, are self-tapping, and are extremely difficult to turn with a screwdriver by hand - but once seated, they secure the pieces in place. For the money - and based on your individual needs or use for such equipment racks - this, VEVOR 12U Open Frame Server Rack, is priced to suit most needs of the user - perhaps more so from a studio (in my opinion) setting where the rack would be "stationed," as opposed to be expected to survive the rigors from being moved from state to stage, while on the road.