Reseñas de clientes para Sierra de cinta portátil VEVOR, 110 V, base de acero de aleación extraíble, inalámbrica, capacidad de corte de 5 pulgadas, sierra de cinta manual, sierra de cinta portátil de velocidad variable, motor de 10 A, sierra de cinta de corte profundo para metal y madera.

Purchased this portable bandsaw to cut aluminum stock down to size and mill on my bench mill (Millennium Machine Milo V1.5). Works great, makes quick cuts through the aluminum stock. Great price and fast shipping. Highly recommended.

I made this review late for I want to comment only after I use it for a while. Over the year, I used it to cut up various metal stocks, to 2x2 1/4 wall tubing smoothly. I can lift the saw from station to become portable and trim off sharp corners of the angles on my 5x8 trailer. Just need to be patient when using it. The blade is sharp and quality. Today the saw blade broke apart. I need to order new saw blade, hope they have stock the saw blade.

After unboxing & wiping all the oil off (which is a necessity for product being shipped from overseas to prevent corrosion, kudos to Vevor), installing the blade and checking all the fasteners for tightness, I set the angle to 90° for the first cut. To be honest, I was very surprised at how accurately it cut. It is as close to 90° both horizontally and vertically as I can measure. Removing the saw from the base is simple and cutting in this mode is easy. Some reviews complain of where the cord comes out of the handle, but it is necessary to be there when the saw is removed from the base. To keep the cord out of the way when mounted to the base, just pass it through the handle. I am very happy with this saw, and it doesn't take up much room in the shop!

I’m really happy with this bandsaw. I only do occasional metalwork so I didn’t want to spend a lot of money on a toothed blade miter saw. I really don’t like the abrasive wheel chop saws. The steel demon diablo blades on a circular saw work well but they make tons of chips that fly everywhere and they have limits on thickness. I was able to cut 4” and 3” steel C-channel pretty easily. It cuts very straight if you go slowly. I also slowed the blade speed some. The included blades work well but I replaced them with a Lenox 18tpi blade from Amazon and it worked nicely on thick and thin metal. I would recommend it. Picture is a steel table I made with it.

This is a pretty stout band saw, I cut 2x2 square with no issues. The saw cuts pretty square also. The factory blades seem like a decent blade to get started with. The saw is pretty basic on the features but there is all you need on it. This will save time by not have to grind etc. All in all this is a great buy.

Excellent value for your money its worth every cent. A great small bandsaw with real power and it does not that much space in your work area. I have been using it about a year now and it has performed like a champion. It cuts quick with no hesitation and straight as well. 90 or 45 it does an excellent job. I would recommend to anyone looking for great bandsaw for their shop

Puristi voisi olla konepuristimen tyyppinen!

Pour le prix ,produit correct ,à voir dans le temps. En ce qui concerne les equerrages: sur la descente correct mais pour l'angle 90 degrés j’ai mesuré 85 degrés en butée . Récupéré les 5 degrés en élargissant les fixations du support de la presse

Tutto ok

La machine donne satisfaction. Une remarque IMPORTANTE : j'ai posé la question d'où trouver des lames de scie de rechange mais je n'ai jamais reçu le retour d'information souhaité.